MCF52223CAF80

Freescale Semiconductor Document Number: MCF52223 Rev. 3, 3/2011 Data Sheet: Technical Data MCF52223 LQFP64 MCF52223 ColdFire 10 mm x 10 mm Microcontroller MAPBGA81 LQFP100 Supports MCF52223 and 10 mm x 10 mm 14 mm x 14 mm MCF52221 The MCF52223 microcontroller family is a member of the Clock module with 8 MHz on-chip relaxation oscillator ColdFire family of reduced instruction set computing and integrated phase-locked loop (PLL) (RISC) microprocessors. Test access/debug port (JTAG, BDM) This document provides an overview of the 32-bit MCF52223 microcontroller, focusing on its highly integrated and diverse feature set. This 32-bit device is based on the Version 2 ColdFire core operating at a frequency up to 80 MHz, offering high performance and low power consumption. On-chip memories connected tightly to the processor core include up to 256 Kbytes of flash memory and 32 Kbytes of static random access memory (SRAM). On-chip modules include: V2 ColdFire core delivering 76 MIPS (Dhrystone 2.1) at 80 MHz running from internal flash memory with Multiply Accumulate (MAC) Unit and hardware divider Universal Serial Bus On-The-Go (USBOTG) USB Transceiver Three universal asynchronous/synchronous receiver/transmitters (UARTs) Inter-integrated circuit (I2C) bus interface module Queued serial peripheral interface (QSPI) module Eight-channel 12-bit fast analog-to-digital converter (ADC) Four-channel direct memory access (DMA) controller Four 32-bit input capture/output compare timers with DMA support (DTIM) Four-channel general-purpose timer (GPT) capable of input capture/output compare, pulse width modulation (PWM), and pulse accumulation Eight-channel/Four-channel, 8-bit/16-bit pulse width modulation timer Two 16-bit periodic interrupt timers (PITs) Real-time clock (RTC) module Programmable software watchdog timer Interrupt controller capable of handling 57 sources Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. Freescale Semiconductor, Inc., 2011. All rights reserved.Table of Contents 1 Family Configurations 3 2.3 Thermal Characteristics 30 1.1 Block Diagram .4 2.4 Flash Memory Characteristics . 31 1.2 Features .5 2.5 EzPort Electrical Specifications 32 1.3 Reset Signals 21 2.6 ESD Protection 32 1.4 PLL and Clock Signals .21 2.7 DC Electrical Specifications . 33 1.5 Mode Selection .21 2.8 Clock Source Electrical Specifications 34 1.6 External Interrupt Signals .22 2.9 General Purpose I/O Timing 35 1.7 Queued Serial Peripheral Interface (QSPI) 22 2.10 Reset Timing 35 2 1.8 USB On-the-Go .22 2.11 I C Input/Output Timing Specifications 36 2 1.9 I C I/O Signals .22 2.12 Analog-to-Digital Converter (ADC) Parameters 37 1.10 UART Module Signals 23 2.13 Equivalent Circuit for ADC Inputs 38 1.11 DMA Timer Signals 23 2.14 DMA Timers Timing Specifications . 39 1.12 ADC Signals .23 2.15 QSPI Electrical Specifications . 39 1.13 General Purpose Timer Signals 24 2.16 JTAG and Boundary Scan Timing 40 1.14 Pulse Width Modulator Signals .24 2.17 Debug AC Timing Specifications . 42 1.15 Debug Support Signals .24 3 Mechanical Outline Drawings 43 1.16 EzPort Signal Descriptions 25 3.1 64-pin LQFP Package . 44 1.17 Power and Ground Pins 26 3.2 81 MAPBGA Package . 50 2 Electrical Characteristics 27 3.3 100-pin LQFP Package 52 2.1 Maximum Ratings .27 4 Revision History 54 2.2 Current Consumption 28 MCF52223 ColdFire Microcontroller, Rev. 3 2 Freescale Semiconductor