MK26FN2M0VMD18 NXP

NXP Semiconductors K26P169M180SF5 Data Sheet: Technical Data Rev. 4, 04/2017 Kinetis K26 Sub-Family MK26FN2M0VMD18 180 MHz ARM Cortex-M4F Microcontroller. MK26FN2M0VMI18 MK26FN2M0VLQ18 MK26FN2M0CAC18R The K26 sub-family members provide greater performance, memory options up to 2 MB total flash and 256 KB of SRAM, as well as higher peripheral integration with features such as Dual USB. These devices maintain hardware and software 144 MAPBGA (MD) 144 LQFP (LQ) compatibility with the existing Kinetis family. 13 mm x 13 mm Pitch 1 20 mm x 20 mm Pitch This product also offers: mm 0.5 mm Integration of a High Speed USB Physical Transceiver Greater performance flexibility with a High Speed Run mode Smarter peripherals with operation in Stop modes 169 MAPBGA (MI) 169 WLCSP (AC) 9 mm x 9 mm Pitch 5.6 mm x 5.5 mm Pitch 0.65 mm 0.4 mm Performance System and Clocks Up to 180 MHz ARM Cortex-M4 based core with DSP Multiple low-power modes to provide power instructions and Single Precision Floating Point unit optimization based on application requirements Memory protection unit with multi-master protection Memories and memory expansion 3 to 32 MHz main crystal oscillator Up to 2 MB program flash memory on non-FlexMemory 32 kHz low power crystal oscillator devices with 256 KB RAM 48 MHz internal reference Up to 1 MB program flash memory and 256 KB of FlexNVM on FlexMemory devices Security 4 KB FlexRAM on FlexMemory devices Hardware random-number generator FlexBus external bus interface and SDRAM controller Supports DES, AES, SHA accelerator (CAU) Multiple levels of embedded flash security Analog modules Two 16-bit SAR ADCs and two 12-bit DAC Timers Four analog comparators (CMP) containing a 6-bit Four Periodic interrupt timers DAC and programmable reference input 16-bit low-power timer Voltage reference 1.2V Two 16-bit low-power timer PWM modules Two 8-channel motor control/general purpose/PWM Communication interfaces timers USB high-/full-/low-speed On-the-Go with on-chip high Two 2-ch quad decoder/general purpose timers speed transceiver Real-time clock USB full-/low-speed OTG with on-chip transceiver Two CAN, three SPI and four I2C modules Operating Characteristics Low Power Universal Asynchronous Receiver/ Voltage/Flash write voltage range:1.71 to 3.6 V Transmitter 0 (LPUART0) and five standard UARTs V-Temperature range (ambient): -40 to 105C Secure Digital Host Controller (SDHC) C-Temperature range (ambient): -40 to 85C I2S module Human-machine interface Low-power hardware touch sensor interface (TSI) General-purpose input/output NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.Ordering Information 1 Part Number Memory Maximum number of I O s Flash SRAM MK26FN2M0VMD18 2 MB 256 KB 100 MK26FN2M0VLQ18 2 MB 256 KB 100 MK26FN2M0CAC18R 2 MB 256 KB 116 MK26FN2M0VMI18 2 MB 256 KB 116 1. To confirm current availability of orderable part numbers, go to