NXP Semiconductors K64P144M120SF5 Data Sheet: Technical Data Rev. 7, 11/2016 Kinetis K64F Sub-Family Data MK64FN1M0Vxx12 MK64FX512Vxx12 Sheet 120 MHz ARM Cortex-M4-based Microcontroller with FPU The K64 product family members are optimized for cost-sensitive applications requiring low-power, USB/Ethernet connectivity, and up to 256 KB of embedded SRAM. These devices share the 121 XFBGA 144 LQFP 8 x 8 x 0.5 mm Pitch 20 x 20 x 1.6 mm Pitch comprehensive enablement and scalability of the Kinetis family. 0.65 mm 0.5 mm This product offers: Run power consumption down to 250 A/MHz. Static power consumption down to 5.8 A with full state retention and 5 s wakeup. Lowest Static mode down to 339 nA USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO 144 MAPBGA 100 QFP 13 x 13 x 1.46 mm 14 x 14 x 1.7 mm Pitch Vreg, with USB device crystal-less operation Pitch 1 mm 0.5 mm 10/100 Mbit/s Ethernet MAC with MII and RMII interfaces Performance Communication interfaces Up to 120 MHz ARM Cortex-M4 core with DSP Ethernet controller with MII and RMII interface instructions and floating point unit USB full-/low-speed On-the-Go controller Controller Area Network (CAN) module Memories and memory interfaces Three SPI modules Up to 1 MB program flash memory and 256 KB RAM Three I2C modules. Support for up to 1 Mbit/s Upto 128 KB FlexNVM and 4 KB FlexRAM on devices Six UART modules with FlexMemory Secure Digital Host Controller (SDHC) FlexBus external bus interface I2S module System peripherals Timers Multiple low-power modes, low-leakage wake-up unit Two 8-channel Flex-Timers (PWM/Motor control) Memory protection unit with multi-master protection Two 2-channel FlexTimers (PWM/Quad decoder) 16-channel DMA controller IEEE 1588 timers External watchdog monitor and software watchdog 32-bit PITs and 16-bit low-power timers Real-time clock Security and integrity modules Programmable delay block Hardware CRC module Hardware random-number generator Clocks Hardware encryption supporting DES, 3DES, AES, 3 to 32 MHz and 32 kHz crystal oscillator MD5, SHA-1, and SHA-256 algorithms PLL, FLL, and multiple internal oscillators 128-bit unique identification (ID) number per chip 48 MHz Internal Reference Clock (IRC48M) Analog modules Operating Characteristics Two 16-bit SAR ADCs Voltage range: 1.71 to 3.6 V Two 12-bit DACs Flash write voltage range: 1.71 to 3.6 V Three analog comparators (CMP) Temperature range (ambient): 40 to 105C Voltage reference NXP reserves the right to change the production detail specifications as may be required to permit improvements in the design of its products.Ordering Information1 Part Number Memory Maximum number of I O s Flash SRAM (KB) MK64FX512VLL12 512 KB 256 66 MK64FN1M0VLL12 1 MB 256 66 MK64FX512VDC12 512 KB 256 83 MK64FN1M0VDC12 1 MB 256 83 MK64FX512VLQ12 512 KB 256 100 MK64FN1M0VLQ12 1 MB 256 100 MK64FX512VMD12 512 KB 256 100 MK64FN1M0VMD12 1 MB 256 100 1. To confirm current availability of ordererable part numbers, go to