TJF1052i CAN Galvanically isolated high-speed CAN transceiver Rev. 3 20 May 2016 Product data sheet 1. General description The TJF1052i is a high-speed CAN transceiver that provides a galvanically isolated interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The TJF1052i is specifically targeted at industrial applications, where galvanic isolation barriers are needed between the high- and low-voltage parts. Safety: Isolation is required for safety reasons, eg. to protect humans from electric shock or to prevent the electronics being damaged by high voltages. Signal integrity: The isolator uses proprietary capacitive isolation technology to transmit and receive CAN signals. This technology enables more reliable data communications in noisy environments, such as electric pumps, elevators or industrial equipment. Performance: The transceiver is designed for high-speed CAN applications, supplying the differential transmit and receive capability to a CAN protocol controller in a microcontroller. Integrating the galvanic isolation along with the transceiver in the TJF1052i removes the need for stand-alone isolation. It also improves reliability and system performance parameters such as loop delay. The TJF1052i belongs to the third generation of high-speed CAN transceivers from NXP Semiconductors, offering significant improvements over first- and second-generation devices. It offers improved ElectroMagnetic Compatibility (EMC) and ElectroStatic Discharge (ESD) performance, and also features ideal passive behavior to the CAN bus when the transceiver supply voltage is off. The TJF1052i implements the CAN physical layer as defined in the current ISO11898 standard (ISO11898-2:2003). Pending the release of ISO11898-2:2016 including CAN FD and SAE J2284-4/5, additional timing parameters defining loop delay symmetry are specified. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. The TJF1052i is an excellent choice for all types of industrial CAN networks where isolation is required for safety reasons or to enhance signal integrity in noisy environments. 2. Features and benefits 2.1 General Isolator and Transceiver integrated into a single SO16 package, reducing board space ISO 11898-2:2003 compliant Timing guaranteed for data rates up to 5 Mbit/s in the CAN FD fast phase Flawless cooperation between the Isolator and the TransceiverTJF1052i NXP Semiconductors Galvanically isolated high-speed CAN transceiver Fewer components improves reliability in applications Guaranteed performance (eg. max loop delay <220 ns) Electrical transient immunity of 45 kV/ s (typ) Suitable for use in 12 V and 24 V systems compatible with 3 V to 5 V microcontrollers Bus common mode voltage (V ) = 25 V cm Low ElectroMagnetic Emission (EME) and high ElectroMagnetic Immunity (EMI) Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant) 2.2 Power management Functional behavior predictable under all supply conditions Transceiver disengages from the bus when not powered up (zero load) 2.3 Protection Up to 5 kV (RMS) rated isolation Three versions available (1 kV, 2.5 kV and 5 kV) Voltage compliant with UL 1577, IEC 61010 and IEC 60950 5 kV (RMS) rated isolation voltage compliant with UL 1577, IEC 61010 and IEC 60950 High ESD handling capability on the bus pins Transmit Data (TXD) dominant time-out function Undervoltage detection on supply pins 3. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit I supply current 1 V = 0 V bus dominant - - 2.6 mA DD1 TXD V =V bus recessive - - 5.6 mA TXD DD1 I supply current 2 V = 0 V bus dominant 60 load - - 70 mA DD2 TXD V =V bus recessive - - 10 mA TXD DD1 V switch-off undervoltage 1.3 - 2.7 V uvd(swoff)(VDD2) detection voltage on pin V DD2 electrostatic discharge voltage IEC 61000-4-2 at pins CANH and CANL 8- +8 kV V ESD voltage on pin CANH 58 - +58 V V CANH voltage on pin CANL 58 - +58 V V CANL virtual junction temperature 40 - +125 C T vj ambient temperature 40 - +105 C T amb TJF1052I All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2016. All rights reserved. Product data sheet Rev. 3 20 May 2016 2 of 27