AFM-C03 Ohmite

AFM Series Single Phase Medical Grade Inlet-type EMI Filter These series range of filters with IEC Inlet are designed to suppress undesirable electrical disturbances in Power Lines. They limit the amplitude of interfering voltages on AC power lines and prevent them from propagating into or out of the filtered equipment. FeA tureS ApplicA tionS Rated Current up to 15A Medical Equipment Low Leakage Diagnostic Equipment High Conducted attenua- X ray Machine tion performance Excellent per formance/ size ratio Integral IEC Connector circuit diAgrAMS Single/Double Fuse AFM-A Option L L L Double Pole/Single L L Cx Throw Switch E I O R N A chArActeriSticS E D Max. Cont. Oper. Voltage 250VAC N N Operating Frequency 50/60Hz AFM-B Current ratings AFM-A: 1A to 15A 40C, AFM-B: 1A to F1 L1 6A 40C AFM-C: 1A to 10A 40C L L L to G 2120VDC for 1 min. High Potential test voltage L L Cx L to L 1414VDC for 1 min. E I O R N A Overload Capability 135% of Rated current for 15 min. E D Design Corresponding to UL 60939-3, CSA 22.2 F2 No.8-13 and IEC 60939 N N Flammability Corresponding to UL 94 V-0 -25C to +85C AFM-C Temperature range F1 L1 Climatic Category 25/85/21 L L Enclosure Material AFM-A and B: Aluminium AFM-C: CRCA Cy L L Cx E E I O Termination Fastons 6.3x0.8 R N A E D Cy F2 N N (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 1AFM Series Single Phase Medical Grade Inlet-type EMI Filter diMenSionS All dimensions in mm Tolerances according to ISO2768-m 32 3.5 CSK 26 .50 22 24 22 40.5 .50 40 .20 29 29 6.3 x 0.8 AFM-A Snap-in option 40.5 47 .50 49.5 .50 31.2 43.2 3.2 CSK 33 .3 40 .50 33 44 1 36 .20 29.5 30.5 AFM-B Snap-in option 49 1 61 1 (Double fuse) 51 1 63 1 (Single fuse) 33.5 R2.5 47.5 .5 31 .50 44 0.50 40 .50 43.5 .50 61 .50 58 0.50 57 0.50 6.3 x 0.8 AFM-C Snap-in 29.2 .50 FASTON 28.5 .50 option 29.7 57.4 R2 49.5 .50 2 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com