E54E-EN-01+ER6022+Datasheet.fm Seite 1 Freitag, 12. Oktober 2007 12:57 12 Rope Pull Emergency Stop Switch ER6022 Long rope spans up to 80 m means fewer number of switches required per application Tension indicatorthe tension indicator makes the system easy to set up and to maintain the proper rope tension Contact arrangements of 2 N/C + 1 N/O or 3 N/C IP67 (NEMA 6) enclosure enables the ER6022 switch to withstand water washdown cleaning Heavy-duty housingthe die-cast housing and stainless steel eye nut makes the ER6022 suitable for demanding industrial applications Reset buttonthe blue reset button must be pushed in order to return to machine run condition following switch actuation by a pulled or slacked rope Long lifethe ER6022 switch is designed for a min- imum of one million actuations Vibration tolerantthe snap-acting switch contacts protect against nuisance tripping due to vibration Indicator beaconthe optional dual indicator bea- con, available in 24 VDC, can be wired to flash red to indicate a tripped switch or glow a constant green to indicate a properly reset switch E-stop buttonthe ER6022 has two mounting posi- tions where the optional E-stop button may be in- stalled the E-stop button may be added or replaced in the field Operation Blue Reset Button Emergency Push Button A blue reset button is provided to easily return The emergency push button may the unit back to its machine-run position after be installed or repositioned in the actuation. field. The ER6022 has two possi- ble mounting positions for the emergency stop button. Installation Hardware Available RK Rope Tension Kit Installation Hardware The RK Rope Tension Kit comes Individual hard- Tension/Gripper with all of the required hardware ware items may for most installations. A spring is be purchased for required as shown in the installa- specific installa- Spring tion example below. tion requirements. Turnbuckle Double Loop Clip Eyebolt Thimble Rope Pulley For the Latest Information ER6022 1 On the Internet: www.omron-industrial.com or www.sti.com ER6022E54E-EN-01+ER6022+Datasheet.fm Seite 2 Freitag, 12. Oktober 2007 12:57 12 Contact Arrangements 0 mm 3.5 mm 14.5 mm 17.0 mm 2NC + 1NO Versions Rope Slack Tension Range Rope Pulled 11/12 21/22 33/34 3NC Versions Rope Slack Tension Range Rope Pulled 11/12 21/22 31/32 Contact Open Contact Closed Mounting Specification 500 mm Every 3 m Every 3 m 500 mm ER6022 Eyebolt Support Safety Spring Wall Tensioner Gripper 80 m Note: Some installations may require a ER6022 on each end. Applications Typical applications are on conveyor systems and across rotating machinery, and around hazardous areas. Ordering information Rope Pull Emergency Stop Switch E-Stop Indicator Beacon Contacts Wiring Entry Model Not included Not included 2 N/C + 1 N/O 3 x M20 ER6022-021M Not included Not included 3 N/C 3 x M20 ER6022-030M Not included Included (24 VDC) 2 N/C + 1 N/O 3 x M20 ER6022-021ML Not included Included (24 VDC) 3 N/C 3 x M20 ER6022-030ML Included Not included 2 N/C + 1 N/O 3 x M20 ER6022-021ME Included Not included 3 N/C 3 x M20 ER6022-030ME Included Included (24 VDC) 2 N/C + 1 N/O 3 x M20 ER6022-021MEL Included Included (24 VDC) 3 N/C 3 x M20 ER6022-030MEL Accessories Item Model Replacement Lid SM06-SL500 Replacement Lid/LED SM06-SL510 Rope Kit, 5 m, Stainless Steel RK5 Rope Kit, 10 m, Stainless Steel RK10 Rope Kit, 20 m, Stainless Steel RK20 Rope Kit, 50 m, Stainless Steel RK50 Rope Kit, 80 m, Stainless Steel RK80 Rope Only, 5 m R5M Rope Only, 10 m R10M For the Latest Information 2 Rope Pull Emergency Stop Switch On the Internet: www.omron-industrial.com or www.sti.com