Knob-type Selector Switch A165S/W Mounting Aperture of 16 mm Modular construction Oil-resistant IP65 models UL and cUL approved. Conforms to EN60947-5-1, IEC947-5-1 Short mounting depth, less than 28.5 mm below panel Wide range of switching capacity from standard to microload Lighted and non-lighted models 2 and 3-notch models Manual and automatic reset models Model Number Structure Model Number Legend Completely Assembled The model numbers used to order sets of Units are illustrated below. One set comprises the Selector, Lamp (lighted models only), and Switch. (1) (2) (3) (4) (5) (6) A 1 6 5 W - A 2A R - 24D - 1 (6) Contact Configuration (1) Lighted/Non-lighted Symbol Type Symbol Type Terminal 1 SPDT S Non-lighted Solder terminal W Lighted 2 DPDT 1P SPDT PCB (2) Shape of Selector terminal 2P DPDT Symbol Shape 2S DPDT Screw-Less (3) Number of Notches/Resetting Method J Rectangular (4) Color of Selector Clamp Symbol No. of notches Reset method A Square Symbol Color Note: 1. Only DPDT contacts are availa- T Round 2M Manual No symbol Black 2 notches ble with 3-notch models and 2A Automatic BA Square (non-lighted Screw-Less Clamp models. (24-mm square) models only) 3M Manual 2. PCB terminals are available 3A Automatic R Red only with 2-notch models. 3 notches G Green (5) Light Source 3MA CCW-manual, Y Yellow Symbol Type CW-automatic 3AM CCW-automatic, No symbol Non-lighted CW-manual 24D 24-V LED Voltage Reduction Unit (24-V Built-in LED) Rated Symbol Type Operating voltage voltage T1 90 to 121 VAC/VDC 110 VAC/VDC LED T2 180 to 242 VAC/VDC 220 VAC/VDC Note: 1. Solder terminals are only available with 100-V models. 2. The Voltage Reduction Unit is not available for models with PCB terminals. Knob-type Selector Switch A165S/W G-59 Pushbutton SwitchesSubassembled 1. Selector A165 - 1 2 3 4 1. Lighted/Non-lighted 4. Illumination Color S: Non-lighted None: Black (Non-lighted models only) W: Lighted R: Red 2. Flange Shape G: Green J: Rectangular Y: Yellow A: Square T: Round BA: Square (24-mm square) 3. Number of Notches/Reset Method 2M: 2 notches/Manual 2A: 2 notches/Automatic 3M: 3 notches/Manual 3A: 3 notches/Mixed-operation 3MA: 3 notches 3AM: 3 notches 2. Switch (Same as for Key-type Selector Switches) A16S- - 1 2 3 4 1. Number of Notches 3. Lighted/Non-lighted 2N: 2 notches None: Non-lighted 3N: 3 notches L: Lighted 2. Contacts 4. Terminals 1: SPDT None: Solder terminals (tab terminals 110) 2: DPDT 3. Lamp A16- 1 2 1. Operating Voltage (Rated Voltage) 2. Illumination Color LED R: Red (LED) 5DS: 5 VDC (5 VDC) G: Green (LED) 12DS:12 VDC (12 VDC) Y: Yellow (LED) 24DS:24 VDC (24 VDC) G-60 Knob-type Selector Switch A165S/W