Hinged Tactile Switch B3J Through-hole-mounting Switches with Hinges for a Sharp Snap Action Quick, superior snap action through hook-type hinge construction. Available with 1 or 2 LEDs or without LEDs. The hinge button is available in a wide variety of colors (five standard colors). RoHS Compliant List of Models Box Contact Operating Color of Minimum Operation type material force (OF) hinged button Model packing unit 1.27 N 130 gf Non-lighted: Silver plated Ivory B3J-1000 B3J-1000 Series Black B3J-1100 Orange B3J-1200 300 pcs Yellow B3J-1300 Blue B3J-1400 Box LED color Minimum Contact Operating Color of packing unit Operation type material force (OF) hinged button Red Yellow Green 1.27 N 130 gf One LED: Silver plated Ivory B3J-2000 B3J-3000 B3J-4000 B3J-2000 Series Black B3J-2100 B3J-3100 B3J-4100 B3J-3000 Series Orange B3J-2200 B3J-3200 B3J-4200 300 pcs B3J-4000 Series Yellow B3J-2300 B3J-3300 B3J-4300 Blue B3J-2400 B3J-3400 B3J-4400 Box LED color Minimum Contact Operating Color of packing unit Operation type material force (OF) hinged button Red/Yellow Red/Green Yellow/Green 1.27 N 130 gf Two LEDs: Silver plated Ivory B3J-5000 B3J-6000 B3J-7000 B3J-5000 Series Black B3J-5100 B3J-6100 B3J-7100 B3J-6000 Series Orange B3J-5200 B3J-6200 B3J-7200 300 pcs B3J-7000 Series Yellow B3J-5300 B3J-6300 B3J-7300 Blue B3J-5400 B3J-6400 B3J-7400 1B3J B3J Ratings/Characteristics Rating (resistive load) 1 to 50 mA, 3 to 24 VDC Minimum applicable load (reference value) 10 A at 1 VDC (resistive load) Ambient operating temperature -25C to +70C at 60%RH max. (with no icing or condensation) Ambient operating humidity 35% to 85% (at +5 to +35C) Contact form SPST-NO Contact resistance (initial value) 100 m max. Insulation resistance 100 M min. (at 250 VDC with insulation tester) Dielectric strength 500 VAC, 50/60 Hz for 1 min Bounce time 5 ms max. Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Destruction: 1,000 m/s approx. 100G max. 2 Malfunction: 100 m/s approx. 10G max. Durability 3,000,000 operations min. Weight Approx. 1.5 to 1.7 g Degree of protection IEC IP00 Washing Not possible Operating Characteristics Operating force (OF) 1.270.49 N 13050 gf Releasing force (RF) 0.29 N 30 gf min. +0.2 Pretravel (PT) 0.3 / mm 0.1 LED Specifications Item Red Yellow Green Forward voltage VF Standard value (V) 2.0 2.0 2.1 Forward current IF Standard value (mA) 20 20 20 Permissible loss P Absolute maximum value (mW) 84 84 84 Reverse voltage VR Absolute maximum value (V) 555 Note: Since the built-in LED does not contain any limiting resistors, externally connect limiting resistors within the limits shown in the above table. 2