B3SE-1002P Omron

B3SE Ultra-thin Sealed Surface-mounting Tactile Switch PCB surface-mounting 6-mm square type that achieves high durability with an ultra-thin, sealed structure. A height of 2 mm contributes to the development of thinner and smaller devices. Sealed construction conforming to IP67 (IEC 60529) provides high contact reliability in dusty environments. (* Excluding the terminal section.) Crisp click feeling and high durability of 1million operations. Surface-mounting pin type is suitable for high-density mounting. A small package containing 100 embossed taping reels is available, in addition to the standard package containing 2000 reels. RoHS Compliant List of Model 6 6 mm Models Embossed tape Type Contact material Plunger Height Operating force (OF) Plunger color Minimum packing Model unit B3SE-1002P 2,000 B3SE Silver plated 2.0 mm 1.96 N 200 gf Blue B3SE-1002P-R100 100 Note:Orders must be made in multiples of the minimum order. Switches are not sold individually. Ratings/Characteristics Operating Characteristics Rating (resistive load) 1 to 50 mA at 3 to 12 VDC Item Operation type B3SE-1002P Minimum applicable Operating force (OF) 1.96 0.49 N 200 50 gf 10 A at 1 VDC (resistive load) load (reference value) Releasing force (RF) 0.35 N min. 35 gf Ambient operating tem- -25C to +70C at 60%RH max. (with no icing or Pretravel (PT) 0.3 0.2 mm perature condensation) Ambient operating hu- 35% to 85% (at +5 to +35C) Model Structure midity Contact form SPST-NO Cover Plunger Contact resistance (ini- 100 m max. tial value) Insulation resistance 100 M min. (at 250 VDC with insulation tester) Dielectric strength 250 VAC, 50/60 Hz for 1 min Contact Fixed dome Bounce time 5 ms max. Contact Destruction: 10 to 55 Hz, 1.5-mm double Vibration resistance amplitude 2 Shock resistance Destruction: 980 m/s approx. 100 G max. Durability 1,000,000 operations min. Degree of protection IEC IP67 Washing Not possible 1B3SE Ultra-thin Sealed Surface-mounting Tactile Switch Dimensions (Unit: mm) B3SE-1002P B3SE-1002P-R100 Terminal Arrangement/ 6.2 PCB Pad Internal Connections (Top View) (Top View) 0.2 7 4 4 3 3 5 2 1 2.5 dia. 3 7 8.5 2 0.8 6.8 0.7 1.5 Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. No terminal numbers are indicated on the Switches. Precautions Be sure to read the precautions common to all Tactile Switches on pages for correct use. Please check each region s Terms & Conditions by region website. OMRON Corporation ElectrElectronic and Meconic and Mechanical Components Companhanical Components Companyy Regional Contact Americas Europe