BS-1 Omron

Electrode Holder BF- (R)/BS-1(T) Complete Lineup for Use in High- temperature, High-pressure Environments or Where Exposed to Chemicals The BF-1 is ideal for liquids with low specific resistance, such as wastewater. The BF- (R) is used when a strong mounting is required. The BS-1 is used when high-temperature, high-pressure resistant is required. The BS-1T is used when corrosion resistance is required. Refer to Safety Precautions for Electrodes and Electrode Holders. Ordering Information Electrode Holders Accessories (Order Separately) Application Model Application Model Liquid with low specific resistance Protective Cover (For PS- S and BF-3/-4/-5) F03-11 For 1-pole electrode BF-1 M18 Nut (For BS-1) F03-17 When sturdy mounting is required M18 Nut (For BS-1T) F03-18 For 3-pole electrode BF-3 For 3-pole electrode (2-wire) BF-3R For 5-pole electrode BF-5 For 5-pole electrode (2-wire) BF-5R Applications where resistance to high- BS-1 temperature, high-pressure is required BS-1S For 1-pole electrodes, 250C, 1.96 MPa BS-1S1 BS-1S2 High-pressure application where resistance to corrosion is required For 1-pole electrode, SUS304 981 kPa BS-1T SUS304 For 1-pole electrode, SUS316 981 kPa BS-1T SUS316 For 1-pole electrode, Titanium 981 kPa BS-1T CHITAN For 1-pole electrode, Hastelloy B 981 kPa BS-1T HAS B For 1-pole electrode, Hastelloy C 981 kPa BS-1T HAS C Specifications Model BF-1 BF-3 (R) BF-5 (R) BS-1 BS-1T Item (See note 1.) (See note 1.) No. of Electrodes 1 3 5 --- --- Insulator material Ceramic (Metallic section is SUS.) Fluorocarbon polymer (PFA) Insulation resistance 100 M : Operating temperature 10 to 150 q C (with no icing) 250q C max. 180 q C max. Operating pressure Atmospheric pressure 1.96 MPa (See note 2.) 981 kPa (See note 2.) Applications Liquids with low specific General applications for purified water Boiler water level Acid or alkaline resistance, such as and wastewater detection or high- solution level wastewater and cloudy temperature tanks detection water Note: 1. Two-wire Electrode Holders (R models) have a built-in resistance of 6.8 k : . They should be used with the Two-wire 61F Controllers. 2. There must be a sufficient ambient temperature in a high-pressure environment to prevent vapor leakage. Use the Electrode Holder according to the following pressure-temperature curve. BF- (R)/BS-1(T) Pressure-Temperature Curve Temperature (C) 200 150 100 Example For a pressure of 1.6 MPa, the temperature inside 0 0.4 0.8 1.2 1.6 2.0 2.4 the water tank must be at least 200q C. Pressure (MPa) Appearance BF-1 BF-3(R) BS-1 BS-1T BF-5(R) Maximum terminal SUS Hastelloy Heat resistance: 150C tightening torque: Titanium 137.2 Ncm Heat resistance: 70C Material at Heat resistance: 70C Heat resistance: 250C clamping section: Heat resistance: 150C iron (standard) SUS304 and SUS316 are also (See note 3.) Heat resistance: 150C available. (See note 1.) (See note 2.) Note: 1. The F03-11 Protective Cover (sold separately) is available. 2. Model Material at tightening Screws section BS-1 Iron M18 P = 1.5 BS-1S SUS304 M18 P = 1.5 BS-1S1 SUS304 PT1/2 BS-1S2 SUS316 M18 P = 1.5 3. Clamp screws are not provided for hastelloy B, hastelloy C, or titanium Electrode Holders. When placing an order, specify the type of material from the following five: SUS304, SUS316, Hastelloy B, Hastelloy C, or Titanium. Accessories Required for Connecting Electrodes to the BF- (R) (Order Separately) Electrode Shorter Electrode Longer Than 1 m Than 1 m Separator (for 1-pole) The following items are required for The following items are required for BF- (R) each pole. every additional meter of electrode for each pole. 1 F03-01 u Electrode Connecting nut Spring washer 1 F03u -01 Electrode 1 u F03-03 Lock Nut (See note 1.) Spring washer 1 F03u -02 Connecting Nut The Electrode can be cut anywhere Lock nut Lock nut 2 F03u -03 Lock Nuts to a desired control level. Electrode Use F03-14 1P Separators to Electrode prevent the electrodes from touching each another. Note: 1. The spring washer comes with the lock nut. 2. Refer to F03- for details on Electrodes, Connecting Nuts, Lock Nuts, and Separators.