Peripheral Devices T-branch Taps and Terminal-block Terminator T-branch Taps Create One or Three Branch Lines Ordering Information Product Appearance Model Specification T-branch Tap for 1 branch line DCN1-1C Provided with 3 connectors, standard terminating resistor T-branch Tap for 2 branch lines DCN1-3C Provided with 5 connectors, standard terminating resistor Connector XW4B-05C1-H1-D --- DeviceNet Cables Thin cables DCA1-5C10 Outer diameter: 7.00 mm Length: 100 m Thick cables DCA2-5C10 Outer diameter: 11.6 mm Length: 100 m Terminal-block Terminator DRS1-T Resistance of 121 W 136Peripheral Devices Peripheral Devices Connectors for DCN1-jC Model Comments Manufacturer MSTB2.5/5-ST-5.08-AU For node connection Phoenix Contact Corporation MSTBP2.5/5-STF-5.08-AB AU SO For T-branch Tap connection (with screws Phoenix Contact Corporation to secure the connector) Specifications Ratings/Characteristics Rated current Between main lines: 8 A (power supply line) and 2 A (signal line) Between main and branch lines: 3 A (power supply line) and 1 A (signal line) Insulation resistance 100 MW min. (at 500 VDC) Dielectric strength 500 VAC for 1 min, leakage current: 1 mA max. Ambient temperature Operating: 0C to 55C Materials Item Component Materials Unit Main and Expansion Units PBT resin with glass (UL14V-0)/gray DIN track lock POM resin/yellow Terminal block connector (see note) Housing PA66 resin (UL94V-0)/gray Contact Phosphor bronze coated with gold PCB Glass epoxy resin Note: The DCD1-1C is a product of Phoenix Contact. Dimensions Note: All units are in millimeters unless otherwise indicated. DCN1-1 (With No Branching Connector) DCN1-1C (With Three Branching Connectors) Internal Circuit *(See Main line Main line note) Socket for terminator connection Branch line Terminal no. Two, 4 dia. or M4 1 V-- Mounting Dimensions 2 CAN-L 3 DRAIN 4 CAN-H 5 V+ Note: When connecting a branch line to the main line, connect the main line to the connector marked with an asterisk because the resistance between the asterisked portion is minimal. 137