USB-Serial Conversion Cable E58-CIFQ1 CSM E58-CIFQ1 DS E 6 3 Cable for Support Software Enables Connection Even with Temperature Controllers Not Equipped with Communications Easily set Temperature Controller parameters by connecting the computer s USB port and an EJ1, or an E5CN-H, E5AN-H, or E5EN-H. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Ordering Information Model E58-CIFQ1 Specifications Applicable OS Windows XP/Vista/7/8/8.1/10 Applicable software Thermo Mini, CX-Thermo Ver. 4.3 or higher Applicable models EJ1, E5CN-H, E5AN-H, E5EN-H Series USB interface standard Conforms to USB Specification 2.0. DTE speed 38,400 bps Connector specifications Computer: USB (type A plug) Temperature Controller: Serial Power supply Bus power (Supplied from USB host controller.) Power supply voltage 5 VDC Current consumption 70 mA Ambient temperature range Operating : 0C to 55C, Stored : -20C to 60C (with no icing or condensation) Ambient humidity range Operating : 10% to 80% (with no condensation) Weight Approx. 100 g Note: A driver must be installed in the personal computer. Refer to installation information in the operation manual for the Conversion Cable. Dimensions USB-Serial Conversion Cable E58-CIFQ1 (2,100) 250 1,765 LED (SD) USB connector (type A plug) Serial connector LED (RD) ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 1Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omrons exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omrons sole obligation hereunder shall be, at Omrons election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omrons analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See