EE-SPX303-N Omron

Broad Slot-type Photomicrosensor EE-SPX303N/403N CSM EE-SPX303N 403N DS E 3 4 A Wide Slot Width of 13 mm and Superior Resistance to Light Interference and Noise. Noise resistance equivalent to photomicrosensors with built-in amplifiers. Resistance to common noise at least 30 times that of previous models. Resistance to inverter noise at least 10 times that of previous models. Reverse polarity protection built in. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 3. Ordering Information Sensors Infrared light Sensing distance Output Appearance Sensing method Output type Model (slot width) configuration Dark-ON EE-SPX303N Through-beam type 13 mm NPN output (with slot) (slot width) Light-ON EE-SPX403N Accessories (Order Separately) Type Cable length Model Connector EE-1001 EE-1009 * EE-1006 1M 1 m EE-1010 1M * Connector with Cable EE-1006 2M 2 m EE-1010 2M * 1 m EE-1010-R 1M * Connector with Robot Cable 2 m EE-1010-R 2M * NPN/PNP Conversion Connector 0.46 m (total length) EE-2002 Note: Refer to Accessories for details. * EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled. 1EE-SPX303N/403N Ratings and Specifications Item Models EE-SPX303N, EE-SPX403N Sensing distance 13 mm (slot width) Sensing object Opaque: 2.2 0.5 mm min. Differential distance 0.05 mm max. Infrared LED (pulse lighting) with a peak wavelength of Light source 940 nm Indicator Light indicator (red) Supply voltage 12 to 24 VDC 10%, ripple (p-p): 5% max. Current consumption 15 mA max. * The response frequency was measured by detecting the following rotating disk. NPN voltage output: Load power supply voltage: 12 to 24 VDC Load current: 80 mA max. Control output OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 2.0 V max. 10 mA load current with a residual voltage of 1.0 V max. 2 mm 2 mm 2 mm Power supply reverse polarity protection, Protection circuits Disk Output reverse polarity protection Response frequency * 100 Hz min. 3,000 lx max. with incandescent light or sunlight on the surface of Ambient illumination the receiver. Ambient temperature Operating: 10 to +55C range Storage: 25 to +65C Operating: 5% to 85% Ambient humidity range Storage: 5% to 95% Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each Vibration resistance in X, Y, and Z directions 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions Degree of protection IEC IP50 Connecting method Special connector (soldering not possible) Weight Approx. 4 g Material Polycarbonate Engineering Data (Reference Value) Sensing Position Characteristics EE-SPX303N Dark-ON Dark-ON d d Light-ON Light-ON 0 1 2 3 4 5 6 0 1 2 3 4 5 6 Distance d (mm) Distance d (mm) 2