EE-SX4009-P10 Omron

Photomicrosensor (Transmissive) EE-SX4009-P10 Slot / Screw mounting / Connector Type (Slot width: 5 mm) Screw-mounting High resolution with a 0.5-mm-wide aperture Directly connectable to C-MOS Connects to US Molex connectors Be sure to read Safety Precautions on page 2. RoHS Compliant Model Number Structure EE-S X 4 009 - P - 10 (1) (2) (3) (4) (5) (6) (1) (2) (3) Photomicrosensor Transmissive Photo IC output, Light-ON (4) (4) (6) Serial number PCB mounting Serial number Ordering Information Photomicrosensor Minimum Sensing Connecting Aperture size Appearance Sensing distance Output type Model packing unit method method (H W) (mm) (Unit: pcs) Both emitting 18 Transmissive side and EE-SX4009-P10 5 mm Connector Photo IC 1 (slot type) detecting side (Light-ON) (slot width) 2 0.5 34 11 Note: Order in multiples of minimum packing unit. Ratings, Characteristics and Exterior Specifications Absolute Maximum Ratings (Ta = 25C) Electrical and Optical Characteristics (Ta = 25C, Vcc = 5 V 10%) Item Symbol Rated value Unit Value Symb Power supply Item Unit Condition VCC 10 V ol MIN. TYP. MAX. voltage Current With and Output voltage VOUT 28 V ICC --- --- 30 mA consumption without incident Output current IOUT 16 mA Low-level Permissible output IOUT = 16 mA, POUT 250 * mW output VOL --- --- 0.3 V dissipation with incident voltage Operating Topr -25 to +75 C High-level VOUT = VCC, temperature (VCC output VOH --- --- V without incident, 0.9) Storage temperature Tstg -40 to +85 C voltage RL = 47 k Soldering Response VOUT = VCC *, Tsol --- C f 3 --- --- kHz temperature frequency RL = 47 k * Refer to the temperature rating chart if the ambient temperature * The value of the response frequency is measured by rotating the exceeds 25C. disk as shown below. Disk Exterior Specifications 2.1 mm Material Connecting method Weight (g) Case 0.5 mm 0.5 mm t = 0.2 mm Connector 3.4 Polycarbonate 1EE-SX4009-P10 Engineering Data (Reference value) Fig 1. Output Allowable Dissipation vs. Fig 2. Sensing Position Characteristics Ambient Temperature Characteristics (Typical) 300 d1 = 00.3 mm VCC = 5 V Ta = 25C R = 330 L 250 200 ON d1 (OFF) (Center of optical axis) - 0 + 150 d 100 50 Light interrupting OFF plate (ON) 0 -40 -20 0 20 40 60 80 100 -3 -2 -1 0 12 3 Ambient temperature Ta (C) Distance d (mm) Safety Precautions To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor. CAUTION Precautions for Correct Use This product is not designed or rated for ensuring Do not use the product in atmospheres or safety of persons either directly or indirectly. environments that exceed product ratings. Do not use it for such purposes. Dispose of this product as industrial waste. Precautions for Safe Use Do not use the product with a voltage or current that exceeds the rated range. Applying a voltage or current that is higher than the rated range may result in explosion or fire. Do not miswire such as the polarity of the power supply voltage. Otherwise the product may be damaged or it may burn. Do not short-circuit the load. Otherwise explosion or burning may occur. This product does not resist water. 2 Permissible output dissipation POUT (mW) Output transistor