ES2-THB

Humidity Sensor Temperature/Humidity Sensor ES2-HB ES2-THB CSM ES2-HB ES2-THB DS E 3 4 Detect Humidity within an Accuracy of 3% in a Compact Body. Controller Set Provides Superior Humidity Control and Temperature/ Humidity Control. Employs high-polymer-resistive Sensor with superior durability. Compact and lightweight. Measurement ranges of 20% to 95% for humidity and 0 to 55C for temperature. Ordering Information Dimensions Note: All units are in millimeters unless otherwise indicated. Name Model ES2-HB Humidity Sensor Humidity Sensor ES2-HB ES2-THB Temperature/Humidity Sensor Temperature/Humidity Sensor ES2-THB 50 22 Humidity Sensor Module (See note.) ES2-M Note: This is a replacement item. One Module is provided with the ES2-HB/-THB. Always attach the Humidity Sensor Module when using the ES2-HB/-THB. Approximately 7 VDC will be output for the humidity output if the Module is not attached or is 50 incompletely attached. Specifications Humidity Sensor section High-polymer resistive 5.1 dia. Humidity detection range 20 to 95% Humidity detection 3% (25C, 40 to 80%) Shield wire in transparent tube accuracy Shield 5,000 200 Power supply voltage 24 VDC (See note 1.) (25) White OUT Operating voltage range 85% to 110% of power supply voltage Black Current consumption 10 mA max. Humidity G signal Humidity output 1 to 5 V (for humidity of 0% to 100%) Red Permissible load impedance: 100 k min. IN (Use a 1:1 connection when connecting to Heat-shrinking tube 150 20 an E5CC/E5EC/E5AC.) Cover Temperature Sensor Platinum resistance thermometer Section (See note 2.) 4 dia. 37 Temperature 0 to 55C detection range Temperature output Pt100: 3 wire (See note 4.) 37 Class JIS class B Communications cable length 5 m Operating temperature 0 to 55C, humidity of 95% max. and humidity range 4 dia. (See note 3.) Storage temperature 20 to 60C, humidity of 95% max. and humidity range (See note 3.) ES2-M Humidity Sensor Module Degree of protection IP 20 equivalent 21 12.7 Weight ES2-HB: Approx. 41 g (excluding cables) ES2-THB: Approx. 43 g (excluding cables) Note: 1. The maximum ripple voltage of 2% p-p max. 17.5 The recommended power supply is the OMRON S8JX or S8VS. 2. ES2-THB only. 3. Do not use or store the Sensor for an extended period at a Note: Firmly insert the connector all the way in when mounting the humidity of 90% or more. ES2-M to the Sensor. 4. Pt100 (JIS C 1604-1989) is used for the measuring elements. Set Pt100 for input sensor type of the Temperature Controller. 1ES2-HB ES2-THB Precautions for Safe Use Do not use the product in the following locations: Locations subject to water splashing or oil contact Locations subject to dust or corrosive gases Locations subject to icing or condensation Locations subject to direct sunlight Connection Examples ES2-HB Humidity Sensor ES2-THB Temperature/Humidity Sensor ES2-HB ES2-THB Yellow A Temperature input Green (platinum resistance B thermometer) Brown Controller or PT Controller B or PT White White + + Humidity input (1 to 5 V) 1 to 5 V Controller or PT Red Red 24 VDC 24 VDC DC power supply DC power supply Black Black GND GND Shield (Ground separately.) Shield (Ground separately.) Cable Conditions Item Model ES2-HB ES2-THB Diameter AWG22 AWG24 Number of conductors 36 Shield Braided Braided Note: Provide a separate cable according to the details listed Maximum conductive resistance (20C) 60 /km max. 92 /km max. at the left if the length of the supplied cable is insufficient. Finished outer cable diameter 5.1 mm 5.8 mm The cable can be extended to a maximum of 50 m. 2