Picking Sensor F3W-D CSM F3W-D DS E 3 4 Compact, Resistant to Mutual Interference, and Ideal for Picking a Variety of Parts. Mounts to a parts rack and uses indicators to show parts picking procedures. Functions as a mistake-proofing Sensor. Use either the built-in LED indicators or external picking indicators. Be sure to read Safety Precautions on page 7. Features Sensing Distance of 3 m External Picking Indicators Can Be Connected Selectable Display Mode: All Lighting, An indicator (M22N Series, etc.) can be directly connected to the All Flashing, Elevator-like Lighting, Picking Sensor and mounted in an easy-to-see location. Accordion-like Lighting Six picking indicators provide very clear displays. Selectable display speed (slow/fast) All lit All flashing Elevator effect Accordion effect Indicator F3W-D052 P M22N Series * * Be sure to check the power supply voltage before use. For more information on the M22N Series, refer to the A22N/M22N/A30N Data Sheet (Cat. No. A254). 1F3W-D Ordering Information Sensors Infrared LED Connection Beams Sensing Sensing Sensing External Appearance method width Output type Model method distance indicator Gap Qty (cable length) (mm) --- F3W-D052A *1 Pre-wired (5 m) Possible F3W-D052AP*1 Through- NPN open 25 mm 5 100 3 m beam collector --- F3W-D052B *1, 2 Pre-wired connector (2 m) Possible F3W-D052BP*1, 2 *1. Models with PNP outputs are also available. To order PNP Models, replace A with C in the model number for a Pre-wired Model and B with D in the model number for a Pre-wired Connector Model (Example: F3W-D052C). *2. The XS2F-D521- G0 is the applicable connector cable. The colors of the external sheathes of the conductors, however, are different. Refer to the XS2. Accessories (Order Separately) Mounting Brackets Y-shaped Joint Plugs and Sockets (Cable with Connectors on Both Ends) Appearance Model Qty Remarks Overall Appearance Model Qty length L-shaped Mounting XS2R-D526 two Bracket 2 m 1 F39-L10 per set (mounting screws -S001-2 included) XS2R-D526 5 m 1 -S001-5 Flat Mounting Y-shaped Joint Plugs and Sockets without Cable two Bracket F39-L11 Appearance Model Qty Remarks per set (mounting screws included) Connecting cable: Cable with connectors on both ends: XS2W XS2R-D526 1 Series Protective Bracket -S003 Cable with connector on one end: XS2F Series Appearance Model Qty 4-conductor models One each for Emitter and Receiver F39-L12 (mounting screws included) Sensor I/O Connectors (Models for Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) Size Type Appearance Cable length Model Straight 2 m XS2F-D421-D80-F 5 m XS2F-D421-G80-F Socket on one cable end L-shape 2 m XS2F-D422-D80-F 5 m XS2F-D422-G80-F M12 Straight/Straight 2 m XS2W-D421-D81-F 5 m XS2W-D421-G81-F Socket and plug on cable ends * L-shape/L-shape 2 m XS2W-D422-D81-F 5 m XS2W-D422-G81-F Note: 1. Each model includes one cable. A cable is required for both the Emitter and the Receiver (two cables total). 2. Refer to Sensor I/O Connectors/Sensor Controllers on your OMRON website for details. * Straight type/L-shape type combinations are also available. 2 2