416 228 MOS FET Relays G3VM-21LR11 High-power, 0.9-A Switching with SSOP Package in a 20-V Load Voltage Model. RoHS compliant Application Examples Semiconductor inspection tools Measurement devices Broadband systems Note: The actual product is marked differently from the image shown Data loggers here. List of Models Contact form Terminals Load voltage (peak value) Model Number per tape SPST-NO Surface-mounting 20 V G3VM-21LR11 --- terminals G3VM-21LR11(TR05) 500 G3VM-21LR11(TR) 1,500 Note: Use TR05 instead of TR in the part number, to obtain reels with 500 pc/reel. (e.g., G3VM-21LR11(TR05)) Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR11 4.2 1.9 14 dia. 3.65 0.15 1.8 Note: A tolerance of 0.1 mm applies to all dimensions unless otherwise (0.3) 0.2 specified. 1.27 3.8 Note: The actual product is marked differently 2.04 from the image shown here. (0.46) Weight: 0.03 g Terminal Arrangement/Internal Connections (Top View) 43 G3VM-21LR11 43 The actual product is marked differently from the image shown here. 228 Beveled side is input side. 12 12 Pin 1 Pin 1 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR11 3.73 0.95 0.8 1.27 MOS FET Relays G3VM-21LR11 243 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement Conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between the input and F output was checked by applying voltage be- LED forward current I /C 0.5 mA/CT 25C F a tween all pins as a group on the LED side and reduction rate all pins as a group on the light-receiving side. LED reverse voltage V 5V R Connection temperature T 125 C j Output Load voltage (AC peak/DC) V 20 V OFF Continuous load current I 900 mA O (AC peak/DC) ON current reduction rate I /C 12 mA/CT 50C O a Connection temperature T 125 C j Dielectric strength between input and V 1,500 V AC for 1 min I-O rms output (See note 1.) Ambient operating temperature T 20 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature --- 260 C 10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA Note: 2. Turn-ON and Turn-OFF F F Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL VDD Capacity between terminals C --- 15 --- pF V = 0, f = 1 MHz T VOUT 2 3 Trigger LED forward current I --- --- 3.0 mA I = 100 mA FT O Output Maximum resistance with output ON R --- 0.18 0.22 I = 5 mA, ON F I = 900 mA, t < 1 s O IF Current leakage when the relay is open I --- 0.2 1.0 nA V = 20 V LEAK OFF Capacity between terminals C --- 40 80 pF V = 0, f = 100 MHz, OFF t < 1 s 90% VOUT 10% Capacity between I/O terminals C --- 0.3 --- pF f = 1 MHz, V = 0 V t ON t OFF I-O s Insulation resistance between I/O terminals R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.3 2.0 ms I = 5 mA, R = 200 , ON F L V = 10 V (See note 2.) DD Turn-OFF time t --- 0.2 1.0 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit V Load voltage (AC peak/DC) V --- --- 20 DD mA Operating LED forward current I --- --- 20 F mA Continuous load current (AC peak/DC) I --- --- 900 O C Operating temperature T 20 --- 65 a 244 MOS FET Relays G3VM-21LR11