Low Signal Relay G6L Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World Uses 20% less mounting area and approximately 64% less volume in comparison with the G5V-1 relay. Measures just 7.0 (W) x 10.6 (L) x 4.5 (H) mm for surface- mount or 4.1 (H) for through-hole. High dielectric strength: 1,000 VAC between coil and con- tacts and 750 VAC between contacts of the same polarity. Conforms to FCC Part 68. UL recognized / CSA certified RoHS Compliant - Use of lead completely eliminated. Ordering Information Contact form Construction Mounting type Model SPST-NO Fully sealed Through-hole terminal G6L-1P Surface-mount terminal G6L-1F . Note: 1. When ordering, add the rated coil voltage to the model number. Example: G6L-1P DC12 Rated coil voltage 2. When ordering tape packing (surface mount versions), add-T to the model number. Example: G6L-1F-TR DC12 Tape packing Be sure since -T is not part of the relay model number, it is not marked on the relay case. Model Number Legend: G6L - 1 - DC 1 2 3 4 3. Packaging 4. Rated Coil Voltage 1. Contact Form 2. Terminal Shape 3, 4.5, 5, 12, 24 1: SPST-NO None: Tube packaging P: Through-hole TR: Tape and reel packaging F: Surface mount (SMT versions) Application Examples Peripherals of MODEM/PC Communications equipment Telephones Measurement devices Office automation machines Amusement equipment Audio-visual products Security equipment Low Signal Relay G6L 1Specifications Contact Ratings Item Resistive load Contact material Ag (Au-alloy surface) Contact type Single crossbar Rated load 0.3Aat125VAC,1Aat24VDC Carry current 1A Max. switching voltage 125 VAC, 60 VDC Max. switching current 1A Min. permissible load-Plevel (See note) 1mAat5VDC Note: This value was measured at a switching frequency of 120 operations/min. This value may vary, depending on switching frequency, operating conditions, expected reliability level of the relay, etc. It is always recommended to double-check relay suitability under actual load conditions. Coil Ratings Item Voltage Rating Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Rated current 60.0 mA 40.0 mA 36.0 mA 15.0 mA 9.6 mA Coil resistance 50.0 112.5 139.0 800.0 2,504.0 Pick-up voltage 75% max. of rated voltage Dropout voltage 10% min. of rated voltage Maximum voltage 150% of rated voltage 130% of rated voltage Power consumption Approx. 180 mW Approx. 230 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2. The operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. 4. The voltage measurements for Pick-up/Dropout are the values obtained for instantaneous changes in the voltage (rectangular wave). Characteristics Item G6L-1P, G6L-1F Contact resistance (See Note 1) 100 m max. Operate time (See Note 2) 5 ms max. (approx. 1.1 ms) Release time (See Note 2) 5 ms max. (approx. 0.4 ms) Insulation resistance (See Note 3) 1,000 M min. (at 500 VDC) Dielectric strength Coil and contacts 1,000 VAC, 50/60 Hz for 1 min Contacts of same 750 VAC, 50/60 Hz for 1 min poles Surge withstand Coil and contacts 1,500 VAC, 10 160 s voltage Vibration Mechanical durability 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) Malfunction durability 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) 2 Shock Mechanical durability 1,000 m/s 2 Malfunction durability 100 m/s Service life Mechanical 5,000,000 operations min. (at 36,000 operations/hour) Electrical 100,000 operations min. (with a rated load at 1,800 operations/hour) Ambient operating temperature Operating: -40Cto70C (with no icing or condensation) Ambient operating humidity Operating: 5% to 85% RH Weight Approx. 0.6 g Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method. 2. Values in parentheses are actual values. 3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielec- tric strength. 4. The above values are initial values. 2 Low Signal Relay G6L