Machine Automation Controller NJ-Series Controller that covers functions and high-speed processing required for machine control and safety, reliability and maintainability Features Implemented OPC UA as standard feature. (NJ501-1 00) Integration of Logic and Motion in one CPU. Conforms to IEC 61131-3 (JIS B 3503) standard programming and PLCopen function blocks for Motion Control. Programming with variables allows users to create complex programs efficiently. Fast and accurate control by synchronizing all EtherCAT devices, such as vision sensors, servo drives, and field devices, with the PLC and Motion Engines. Offers speed without compromising on reliability and robustness expected from PLCs. Complete RAS functions: Transmission frame error check, timeout, bus diagnosis, Watchdog (WDT), memory check, and topology check, etc. Ideal for small-scale control with up to 8 axes. (NJ301- ) Ideal for simple machines. (NJ101- ) Linear and circular interpolation. Electronic gear and cam synchronization. The Controller can be directly connected to a database. No special Unit, software, nor middleware is required. (NJ501- 20/NJ101- 020) The NJ501 SECS/GEM CPU Unit has built-in the SECS/GEM communications functions which are the standards in the semiconductor industry. (NJ501-1340) Control function of parallel link robots, cartesian robots and serial link robots. (NJ501-4 0) Integration of Logic, Motion, OMRON Robot and Kinematics in one CPU. (NJ501-R 0) Realize high-accuracy synchronization motion control (MC) and numerical control (NC) functions by ONE controller. G-Code available. (NJ501-5300) 1NJ-Series System Configuration CJ-series Unit Support Software Configuration Peripheral USB port Sysmac Studio NJ-series Controller CJ-series Units Power Supply Unit CPU Unit LAN USB Or CPU Rack EtherNet/IP EtherCAT Network Configuration Built-in EtherNet/IP port EtherCAT Built-in EtherCAT port Servo Drive/encoder Slave Terminal General-purpose slaves input slaves 2