PYCM-08S

Screwless Clamp Terminal Socket PYFjjS H Screwless clamping greatly contributes to reduce wiring time H No over or under tightening of cable connection so better contact reliability is achieved H Double wiring possible on all the terminals, and easy bridge and branch connections H Use either solid or stranded wires from 0.2 2 to 1.5 mm (AWG24 to AWG16) H Safe terminal arrangement: Coil terminals separated from contact terminals H Unique ejector enables easy relay replacement H Two types of nameplate are available: New RC MY and Legrand H Finger-protection construction Ordering Information Part number IItteemm 4-pole 2-pole Socket PYF14S PYF08S Clip & Release lever PYCM-14S PYCM-08S Nameplate R99-11 nameplate for MY Socket Bridge PYDM-14SR, PYDM-14SB PYDM-08SR, PYDM-08SB Specifications Item PYF14S PYF08S Remarks Relay MY2 Series MY2 Series --- MY4 Series Dimensions 31 85 36.5 mm max. (W H D) 23.2 85 36.5 mm max. (W H D) --- Rated voltage 250 V AC --- Rated carry current 10 A at 55C with MY2 (S) (see note) 10 A at 55C with MY2 (S) VDE0627 5 A at 70C with MY4 (S) 7 A at 70C with MY2 (S) 2 Applicable wires 0.2 to 1.5 mm (AWG24 to AWG16) --- Solid wire Stranded wires Number of wire 2 wires per terminal (1 wire per hole) --- connections 2 Clamping force 10 N min. (0.2 mm ) EN60999 2 40 N min. (1.5 mm ) Note: MY2 (S) can be used at 70C but at 7 A. J SAFETY STANDARDS (APPROVAL PENDING) VDE0627 (IEC664, EN60999) UL508 (UL1059) CSA C22.2 No. 14 (CSA C22.2 No. 158) 1PYFjjS PYFjjS Dimensions Unit: mm 38.2 max. J PYF14S J PYF08S 36.5 max. 36.5 max. 23.2 max. 31 max. 85 max. 85 max. (5.3) J TERMINAL ARRANGEMENT PYF14S PYF08S Common contacts Make contacts Break contacts Coils Note: Pole-2 and pole-3 cannot be used with the MY2 type. Use pole-1 (terminal numbers: 11, 14, 12) and pole-4 (terminal numbers: 41, 44, 42). J MOUNTING HEIGHT (WITH LEVER) PYF14S PYF08S 73.6 typ. 72.6 typ. 28.6 28.6 2