PYDM-14SR

Screwless Clamp Terminal Socket PYF S Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better con- tact reliability is achieved. Double wiring possible on all the terminals, and easy bridge and branch connections. 2 Use either solid or stranded wires from 0.2 to 1.5 mm (AWG24 to AWG16). Safe terminal arrangement: Coil terminals separated from con- tact terminals. Unique ejector enables easy relay replacement. Nameplate available Finger-protection Ordering Information List of Models 4-pole for MY4/MY2 2-pole for MY2 Socket PYF14S PYF08S Clip & Release Lever PYCM-14S PYCM-08S Nameplate R99-11 Socket Bridge PYDM-14SR, PYDM-14SB PYDM-08SR, PYDM-08SB Specifications Ratings/Characteristics Item PYF14S PYF08S Remarks Relay MY2 Series MY2 Series --- MY4 Series Dimensions 31 85 36.5 mm max. (W H D) 23.2 85 36.5 mm max. (W H D) --- Rated voltage 250 VAC --- Rated carry current 10 A at 55C with MY2 (S) 10 A at 55C with MY2 (S) VDE0627 7 A at 70C with MY2 (S) 7 A at 70C with MY2 (S) 5 A at 70C with MY4 (S) 2 --- Applicable wires 0.2 to 1.5 mm (AWG24 to AWG16) Solid wire Stranded wire Number of wire connections 2 wires per terminal (1 wire per hole) --- 2 Clamping force EN60999 10 N min. (0.2 mm ) 2 40 N min. (1.5 mm ) Approved Standards Standard File No. VDE0627 (IEC664, EN60999) 112467UG UL508 (UL1059) E87929 Vol. 3 CSA C22.2 No. 14 (CSA C22.2 No. 158) LR31928 Screwless Clamp Terminal Socket PYF S 1Dimensions Note: All units are in millimeters unless otherwise indicated. 38.2 max. PYF14S PYF08S 36.5 max. 36.5 max. 23.2 max. 31 max. 85 max. 85 max. (5.3) Terminal Arrangement PYF14S PYF08S Common contacts Make contacts Break contacts Coil Note: In case MY2 relay will be used in combination with PYF14S terminals 21, 22, 24 and 31, 32, 34 are not connected. Mounting Height (With Lever) PYF14S PYF08S 73.6 typ. 72.6 typ. 28.6 28.6 2 Screwless Clamp Terminal Socket PYF S