Y92S-32

Accessories Y92 CSM Y92 DS E 7 2 Mounting Brackets Special resin mounting sleeves: Four different models available. Simply select the size that fits the outside diameter of the Sensor. Mounting Bracket Dimensions A Applied Applicable Item Dimension (mm) B hexagonal Sensor Model A B C D E F G bolts diameter Y92E-B8 180.2 10 max. 18 8 dia. 28 max. 6 7.4 dia. M4 20 M8 E G Y92E-B12 240.2 12.5 max. 20 12 dia. 37 max. 6 8 dia. M4 25 M12 Y92E-B18 320.2 17 max. 30 18 dia. 47 max. 7 9.8 dia. M5 32 M18 F Y92E-B30 450.2 17 max. 50 30 dia. 60 max. 10 9.8 dia. M5 50 M30 C D Note: Consider the influence of surrounding metal when mounting non-shielded Sensors. (Refer to information on individual Sensors for dimensions.) Material: Mounting Bracket: Polyacetal Hexagonal bolt and spring washer: Nickel-plated iron Mounting Sleeves (Quick Mounting) Once the Mounting Sleeve and Sensor have been set properly, readjustment is not required when replacing the Sensor. Mounting Sleeve Dimensions Item Dimension (mm) Applicable E (between Sensors A B C D opposing F Model faces) E2E/E2E2 Y92E-G8 Approx. 28 18.5 15.5 M12 117 4 M8 Shielded A Sensors B C E2E/E2E2 F E Y92E-G12 Approx. 29 20.5 17.5 M18 124 4 M12 Shielded D Sensors E2E/E2E2 Y92E-G18 Approx. 35 23.5 20.5 M24 1.5 30 5 M18 Shielded Sensors E2E/E2E2 Y92E-G30 Approx. 39 27.5 24.5 M36 1.5 41 5 M30 Shielded Distance across Two Mounting Sleeve E (between Sensors Sensor lock nut: E clamping nuts opposing E (between opposing faces) Note: Do not tighten the nut with excessive force. Do not exceed the torque in the following table. faces) Item Material: Mounting Sleeve clamping nuts Sensor lock nut Model Bracket: Nickel-plated iron Nut: Nickel-plated brass Y92E-G8 18 Nm 6 Nm Mounting Sleeve: Polyacetal Y92E-G12 40 Nm 15 Nm Y92E-G18 70 Nm 15 Nm Y92E-G30 100 Nm 30 Nm 1Y92 Protective Covers A Protective Cover cannot be used with a Capactive Proximity Sensor. Covers are available to protect the Sensing Head. Simply select the size that fits the outside diameter of the Sensor. Protective Cover Dimensions Cover inner Item Dimension (mm) Applicable Sensor diameter Material diameter Model A B C (threaded) +0.2 M12 Y92E-E12 14 dia. 5 0.5 M12 1 0.1 Shielded Models M18 Y92E-E18 21 dia. 6 10.2 M18 1 Shielded Models M30 Y92E-E30 33 dia. 8 1.50.2 M30 1.5 Shielded Models Polyacetal B resin C +0.2 M12 Y92E-E12M 14 dia. 12 0.5 M12 1 0.1 Unshielded Models M18 Y92E-E18M 21 dia. 16 10.2 M18 1 Unshielded Models A M30 Y92E-E30M 33 dia. 21 1.50.2 M30 1.5 Unshielded Models Sputter Protective Covers (Threaded on Inside of Cover) A Sputter Protective Covers cannot be used with a Capactive Proximity Sensor. The cover uses Fluororesin, so that chips that adhere due to sputtering can be easily removed. Sputter Protective Cover Dimensions D C Item Dimension (mm) Applicable Sensor diameter Model A B C D +0.2 Y92E-E8-7 10 dia. M8 1 0.5 5 M8 Shielded Models 0.1 +0.2 Y92E-E12-7 14 dia. M12 1 0.5 5 M12 Shielded Models B 0.1 A Y92E-E18-7 21 dia. M18 110.2 6 M18 Shielded Models Y92E-E30-7 33 dia. M30 1.5 1.50.2 8 M30 Shielded Models Note: Do not screw on too tightly, or the cap may be damaged. Sputter Protective Covers (Not Threaded on Inside of Cover) A Sputter Protective Covers cannot be used with a Capactive Proximity Sensor. Chips that adhere due to sputtering can be easily removed. Sputter Protective Cover Dimensions Item Dimension (mm) Applicable Sensor Material diameter Model A B C D M12 Y92E-E12-2 11.0 dia. 14.0 dia. 5.0 1.0 Shielded Models 1-dia. through Silicon M18 hole Y92E-E18-2 17.0 dia. 21 dia. 7.0 3.0 rubber Shielded Models C0.5 M30 A B Y92E-E30-2 28.5 dia. 33.0 dia. 8.0 6.0 Shielded Models * C0.5 C0.5 * There is no protrusion on Y92E-E12-2. C D 2