ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. KLI-2113 Linear CCD Image Sensor Description The KLI2113 Image Sensor is a high dynamic range, multispectral, linear CCD image sensor ideally suited for demanding color scanner applications. The imager consists of three parallel 2098-element photodiode www.onsemi.com arrays one for each primary color. The KLI2113 sensor offers high sensitivity, a high data rate, low noise, and negligible lag. Independent exposure control for each channel allows color balancing at the front end. CMOS-compatible 5 V clocks, and single 12 V DC supply are all that are required to drive the KLI2113 sensor, simplifying the design of interface electronics. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture 3 Channel, RGB Tri-linear CCD Pixels Count 2098 3 Figure 1. KLI2113 Linear CCD Pixel Size 14 m (H) 14 m (V) Image Sensor Pixel Pitch 14 m Inter-Array Spacing 112 mm (8 Lines Effective) Features Active Image Size 29.37 mm (H) 0.24 mm (V) High Resolution 29.4 mm (Diagonal) Wide Dynamic Range Saturation Signal 170,000 e High Sensitivity Dynamic Range 76 dB High Operating Speed Responsivity (Wavelength) High Charge Transfer Efficiency 2 R, G, B (RAA) 62, 42, 37 V/ J/cm 2 R, G, B (DAA)* 60, 40, 36 V/ J/cm No Image Lag 2 Mono (AAA, AAB) 66 V/ J/cm Electronic Exposure Control Output Sensitivity 11.5 V/e Pixel Summing Capability Dark Current 0.02 pA/Pixel Up to 2.0 V Peak-Peak Output Dark Current Doubling Rate 9C 5.0 V Clock Inputs Charge Transfer Efficiency 0.99999/Transfer Two-Phase Register Clocking Photoresponse Non-Uniformity 5% Peak-Peak On-Chip Dark Reference Lag (First Field) 0.6% Applications Maximum Data Rate 20 MHz/Channel Digitization Package CERDIP (Sidebrazed, CuW) Machine Vision Cover Glass AR Coated, 2 Sides Mapping/Aerial * Configuration KLI-2113-DAA uses Gen1 color filter set and is not recommended Photography for new designs. NOTE: Parameters above are specified at T = 25C and 2 MHz clock rates unless ORDERING INFORMATION otherwise noted. See detailed ordering and shipping information on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2015 Rev. 5 KLI2113/D