ON Semiconductor Is Now To learn more about onsemi, please visit our website at www.onsemi.com onsemi andand other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided as-is and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and holdo nsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. KLI-4104 Linear CCD Image Sensor Description The KLI4104 Image Sensor is a multi-spectral, linear solid-state image sensor for color scanning applications where fast operation and high resolution are required. The imager consists of three parallel linear photodiode arrays, each with 4,080 active photosites for the www.onsemi.com output of red, green and blue (R, G, and B) signals. The sensor contains a fourth channel for luminance information. This array has 8,160 pixels segmented to transfer out data through one of four luminance outputs. This device offers high sensitivity, high data rates, low noise and negligible lag. Individual electronic exposure control for each of the Chroma and the Luma channel is provided, allowing the KLI4104 sensor to be used under a variety of illumination conditions. Figure 1. KLI4104 Linear CCD Table 1. GENERAL SPECIFICATIONS Image Sensor Parameter Typical Value Total Number of Pixels 3 4134 (Chroma), Features 1 8292 (Luma) Quad-Linear Array (G, R, B, L) Number of Effective Pixels 3 4128 (Chroma), High Resolution: Luma (Monochrome) 1 8276 (Luma) Array with 5 m Pixels with 8,160 Count Number of Active Pixels 3 4080 (Chroma), Luma Channel has 4 Outputs Approaching 1 8160 (Luma) 120 MHz Data Rate Pixel Size 10 m (H) 10 m (V) (Chroma), 5 m (H) 5 m (V) (Luma) High Resolution: Color (RGB) Array with 10 m Pixels with 4,080 Count Pixel Pitch 10 m (Chroma), 5 m (Luma) Each Color Channel has 1 Output Inter-Array Spacing Approaching 30 MHz Data Rate G to R 90 m (9 Lines Effective) No Image Lag R to B 90 m (9 Lines Effective) B to L 122.5 m (12.25 Lines Effective) Two-Phase Register Clocking Chip Size 50.5 mm (H) 1.1 mm (V) On-Ship Dark Reference Saturation Signal 121,000 e (Chroma), Electronic Exposure Control 110,000 e (Luma) Applications Output Sensitivity 14 V/e (Chroma), 11 V/e (Luma) Machine Vision Responsivity 2 R, G, B, Luma (RAA) 34, 23, 21, 9.5 V/ J/cm 2 R, G, B, Luma (DAA) 31, 21, 18, 9.5 V/ J/cm ORDERING INFORMATION 2 Mono (AAA) Chroma 33 V/ J/cm See detailed ordering and shipping information on page 2 of Channels without Filters this data sheet. Total Read Noise 120 e Dark Current 0.007 pA/Pixel (Chroma), 0.0008 pA/Pixel (Luma) Dark Current Doubling Temp. 9C Dynamic Range 60 dB (Chroma), 30 MHz Data Rate 60 dB (Luma) Charge Transfer Efficiency 0.999999/Transfer Photoresponse Non-Uniformity 5% Peak to Peak NOTE: All Parameters are specified at T = 25C unless otherwise noted. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: November, 2015 Rev. 5 KLI4104/D