MM88C29 MM88C30 Quad Single-Ended Line Driver Dual Differential Line Driver
October 1987
Revised June 2001
MM88C29 MM88C30
Quad Single-Ended Line Driver
Dual Differential Line Driver
The MM88C29 is a non-inverting single-wire transmission
General Description
line driver. Since the output ON resistance is a low 20
The MM88C30 is a dual differential line driver that also per-
typ., the device can be used to drive lamps, relays, sole-
forms the dual four-input NAND or dual four-input AND
noids, and clock lines, besides driving data lines.
function. The absence of a clamp diode to V in the input
CC
protection circuitry of the MM88C30 allows a CMOS user to
Features
interface systems operating at different voltage levels.
Wide supply voltage range: 3V to 15V
Thus, a CMOS digital signal source can operate at a V
CC
High noise immunity: 0.45 V (typ.)
voltage greater than the V voltage of the MM88C30 line
CC
CC
driver. The differential output of the MM88C30 eliminates
Low output ON resistance: 20 (typ.)
ground-loop errors.
Ordering Code:
Order Number Package Number Package Description
MM88C29N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
MM88C30M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
MM88C30N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide
Devices also available in Tape and Reel. Specify by appending suffix letter X to the ordering code.
Connection Diagrams
Pin Assignments for DIP Pin Assignments for DIP and SOIC
MM88C29 MM88C30
Top View
Top View
2001 Fairchild Semiconductor Corporation DS005908 www.fairchildsemi.comLogic Diagrams
1/4 MM88C29
1/2 MM88C30
www.fairchildsemi.com 2
MM88C29 MM88C30