NCS2004, NCS2004A Operational Amplifier, Rail-to-Rail, 3.5 MHz, Wide Supply The NCS2004 operational amplifier provides railtorail output www.onsemi.com operation. The output can swing within 70 mV to the positive rail and 30 mV to the negative rail. This railtorail operation enables the user MARKING DIAGRAMS to make optimal use of the entire supply voltage range while taking advantage of 3.5 MHz bandwidth. The NCS2004 can operate on SC88A supply voltage as low as 2.5 V over the temperature range of 40C to (SC705) ADK M 125C. The high bandwidth provides a slew rate of 2.4 V/ s while SN SUFFIX CASE 419A only consuming a typical 390 A of quiescent current. Likewise the NCS2004 can run on a supply voltage as high as 16 V making it ideal ADK = Specific Device Code for a broad range of battery operated applications. Since this is a M = Date Code CMOS device it has high input impedance and low bias currents = PbFree Package making it ideal for interfacing to a wide variety of signal sensors. In (Note: Microdot may be in either location) addition it comes in either a small SC88A or UDFN package 1 allowing for use in high density PCBs. 6 UDFN6 xx M CASE 517AP Features 1 RailToRail Output xx = Specific Device Code AA for NCS2004 Wide Bandwidth: 3.5 MHz AC for NCS2004A High Slew Rate: 2.4 V/ s M = Date Code Wide Power Supply Range: 2.5 V to 16 V = PbFree Package (Note: Microdot may be in either location) Low Supply Current: 390 A Low Input Bias Current: 45 pA PIN CONNECTIONS Wide Temperature Range: 40C to 125C Small Packages: 5Pin SC88A and UDFN6 1.6x1.6 IN+ 1 5 V DD + These Devices are PbFree, Halogen Free/BFR Free and are RoHS V 2 SS Compliant 4 OUT IN 3 Applications Notebook Computers SC88A (Top View) Portable Instruments V 1 6 OUT SS NC 5 V 2 DD + IN 4 IN+ 3 UDFN (Top View) ORDERING INFORMATION Device Package Shipping NCS2004SQ3T2G SC88A 3000 / (PbFree) Tape & Reel NCS2004MUTAG, UDFN6 3000 / NCS2004AMUTAG (PbFree) Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: October, 2015 Rev. 9 NCS2004/DNCS2004, NCS2004A MAXIMUM RATINGS Symbol Rating Value Unit V Supply Voltage 16.5 V DD V Input Differential Voltage Supply Voltage V ID V Input Common Mode Voltage Range 0.2 V to (V + V I DD 0.2 V) I Maximum Input Current 10 mA I I Output Current Range 100 mA O Continuous Total Power Dissipation (Note 1) 200 mW T Maximum Junction Temperature 150 C J Thermal Resistance 333 C/W JA T Operating Temperature Range (freeair) 40 to 125 C stg T Storage Temperature 65 to 150 C stg Mounting Temperature (Infrared or Convection 20 sec) 260 C V Machine Model 300 V ESD Human Body Model 2000 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Continuous short circuit operation to ground at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150C. Output currents in excess of 45 mA over long term may adversely affect reliability. Shorting output to either V+ or V will adversely affect reliability. DC ELECTRICAL CHARACTERISTICS (V = 2.5 V, 3.3 V, 5 V and 5 V, T = 25C, R 10 k unless otherwise noted) DD A L Parameter Symbol Conditions Min Typ Max Unit Input Offset Voltage V mV VIC = V /2, V = V /2, R = 10 k , R = 50 0.5 5.0 IO DD O DD L S (NCS2004) T = 40C to +125C 7.0 A Input Offset Voltage V VIC = V /2, V = V /2, R = 10 k , R = 50 3.0 mV IO DD O DD L S (NCS2004A) T = 40C to +125C 5.0 A Offset Voltage Drift ICV VIC = V /2, V = V /2, R = 10 k , R = 50 2.0 V/C OS DD O DD L S Common Mode CMRR 0 V VIC V 1.35 V, R = 50 V = 2.5 V 55 94 dB DD S DD Rejection Ratio T = 40C to +125C 52 A 0 V VIC V 1.35 V, R = 50 V = 5 V 65 130 DD S DD T = 40C to +125C 62 A 0 V VIC V 1.35 V, R = 50 V = 5 V 69 140 DD DD S T = 40C to +125C 66 A Power Supply PSRR V = 2.5 V to 16 V, VIC = V /2, No Load 70 135 dB DD DD Rejection Ratio T = 40C to +125C 65 A Large Signal A V = V /2, R = 10 k V = 2.5 V 90 130 dB VD O(pp) DD L DD Voltage Gain T = 40C to +125C 76 A V = V /2, R = 10 k V = 3.3 V 92 123 O(pp) DD L DD T = 40C to +125C 76 A V = V /2, R = 10 k V = 5 V 95 127 O(pp) DD L DD T = 40C to +125C 86 A V = V /2, R = 10 k V = 5 V 95 130 O(pp) DD L DD T = 40C to +125C 90 A www.onsemi.com 2