NCV7424 Four Channel LIN Transceiver NCV7424 is a four channel physical layer device using the Local Interconnect Network (LIN) protocol. It allows interfacing of four independent LIN physical buses and the LIN protocol controllers. The www.onsemi.com device is compliant to LIN 2.x Protocol Specification package and the SAE J2602 standard. The NCV7424 LIN device is a member of the in-vehicle networking (IVN) transceiver family. The device is a monolithic solution 16 incorporating 4 times the NCV7321-1 transceiver. 1 Features TSSOP16 CASE 948F TSSOP16 Package. Pin-out Compatible with One Single LIN NCV7321 Transceiver (Pin Numbers 4 to 7, and 10 to 13) Compliant with LIN2.x, Backwards Compatible to Version 1.3 and PACKAGE PICTURE J2602 NCV7424 Transmission Rate 1 kbps to 20 kbps 16 TxD4 1 RxD4 Indefinite Short-Circuit Protection on LIN towards Supply and RxD3 LIN4 Ground TxD3 GND RxD1 LIN3 TSSOP16 Bus Pins Protected Against Transients in an Automotive EN V BB Environment TxD2 LIN1 TxD1 GND Thermal Shutdown RxD289 LIN2 System ESD on LIN Pin Exceeding 10 kV, No Need for External ESD Protections Load Dump Protection (45 V) MARKING DIAGRAM Integrated Slope Control Resulting into Excellent EME Performance also without any Capacitor on LIN Pin 16 NV74 Excellent EMI Performance 240 Remote Wake-up via LIN Bus on all Four Channels ALYW 3.3 V and 5 V Compatible Digital Inputs 1 Quality NCV Prefix for Automotive and Other Applications Requiring NV74240 = Specific Device Code A = Assembly Location Unique Site and Control Change Require ments AECQ100 L = Wafer Lot Qualified and PPAP Capable Y = Year These Devices are PbFree, Halogen Free/BFR Free and are RoHS W = Work Week Compliant = PbFree Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 11 of this data sheet. Semiconductor Components Industries, LLC, 2015 1 Publication Order Number: May, 2015 Rev. 2 NCV7424/DNCV7424 BLOCK DIAGRAM NCV7424 V BB Undervoltage VINT POR State & Osc EN Wakeup Control GND Thermal Timeouts Shutdown GND RxD1 COMP Vint Filter LIN1 Driver Slope TxD1 Control Control Channel1 RxD2 Channel2 LIN2 TxD2 RxD3 LIN3 Channel3 TxD3 RxD4 Channel4 LIN4 TxD4 RB20111020.1 Figure 1. Block Diagram www.onsemi.com 2