GB6198 FibreFab Fibre Optic & Networking Products 62.5/125 Optical Fibre Pigtails Optical fibre pigtails are essential when terminating cables within the splice enclosure. Purchasing pre polished assemblies takes the risk of poor connector termination away from the project. Cables terminated within a production facility will give a higher performance than cables terminated on site. Whilst the cable and connectors used in FibreFab optical fibre pigtails are the best available, it is our expertise in production that sets our products apart. FibreFab has 15 years experience in manufacturing fibre optic cable assemblies using Biconic and SMA through ST, SC to todays Small Form Factor connectors like the LC, MU or MT-RJ. If you have a fibre network, no matter what the technology, FibreFab can offer you a solution. With a FibreFab cable assembly you can be confident you are using the very best in cable, connectors and manufacturing. Tyco AMP approved UK Multimode & Singlemode manufacturing facility applications ST/SC/FC/LC/E2000/ MU Connector types Fast turn around of non-standard requirements Ultra polish & Angle polish options available all terminations Full tracability & test certification are manufactured to exceed supplied with each assembly performance parameters set by industry standards 900m tight buffered fibre optic cable Specifications Patchcord Specification Optical fibre and cable performance Mechanical Attenuation (dB/km) Length: 1m 10mm (850/1300) 2.8/0.8 Other lengths available to order Bandwidth (MHz.Km) Product Packaging (850/1300) 200/500 Each pigtail is packaged individually and individually identified for traceability, test Sheath colour certification is supplied for each assembly. White Connector Specification Optical Performance (Multimode) Insertion loss: Max. 0.3 dB Typical 0.2 dB Optical Performance (MT-RJ) Insertion loss: Max. 0.5 dB Operating Temperature -40C to +85C Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 874-14. For full information on the Optronics connectors used on the FibreFab patch cords, please contact the address below for a connector data sheet. Ordering Information Fibre Cable 1 Size Length (m) Connectors Construction 62 1 FC FC/APC B = 900m SC 3 = 3mm 2 SC/APC M = MiniZip ST LC MT-RJ 1 Other Connectors Available on Request MU 2 MT-RJ is only available in MiniZip E2000 FibreFab Limited Davy Avenue Tel: +44 (0) 870 127 3330 Knowlhill Fax: +44 (0) 870 127 3331 Milton Keynes Email: sales fibrefab.com MK5 8ND Internet: www.fibrefab.com FibreFab Ltd is registered in England no. 2734823. Copyright FibreFab 2005. All Rights Reserved.