P. 1 Technical Data Sheet Plastic Gear Analog Servo Part No. LS-0006 1. Apply Environmental Condition No. Item Specification 1-1 Storage Temperature Range -20C - 60C 1-2 Operating Temperature Range -10C - 50C 1-3 Operating Voltage Range 4.5V - 6.0V 2. Standard Test Environment No. Item Specification 2-1 Standard Test Environment Any test must be under normal temperature and humidity. Temperature:25 5C Humidity: 65 10%, according to the standard to judge. 3. Appearance Inspection No. Item Specification 3-1 Outline Drawing 21.5*11.8*22.7mm 3-2 Appearance No damage 4. Electrical Specification (Function of the Performance) No. Item 4.8V 6.0V 4-1 Operating speed (at no load) 0.14 sec / 60 0.12 sec / 60 4-2 Running current (at no load) 120mA 140 mA 4-3 Stall torque (at locked) 1.0 kg-cm, 1.2 kg-cm 4-4 Stall current (at locked) 390 mA 460 mA 4-5 Idle current (at stopped) 4 mA 5 mA Leo Sales Ltd. Richmond, BC, Canada support leosales.comP. 2 5. Mechanical Specification No. Item Specification 5-1 Overall Dimensions 21.5*11.8*22.7 5-2 Limit angle 180 10 5-3 Weight 8 1 g 5-4 Connector wire gauge 28 PVC 5-5 Connector wire length 150 5 mm 5-6 Horn gear spline 24T/ 3.92 5-7 Horn type Cross, disk, star 5-8 Reduction ratio 1/630 6. Control Specification No. Item Specification 6-1 Control system Change pulse width 6-2 Amplifier type Analog control 6-3 Operating travel 90 (at 1000 2000 sec) 6-4 Neutral position 1500 sec 6-5 Dead band width 5 sec 6-6 Rotating direction anticlockwise (at 1500 2000 sec) 6-7 Pulse width range 800 2200 sec 6-8 Maximum travel About 165(at 800 2200 sec) 21.5 26 11.8 22.7 Leo Sales Ltd. Richmond, BC, Canada support leosales.com