P3 COMMERCIAL PUSHBUTTONS SEALED COMMERCIAL GRADE PUSHBUTTONS MOMENTARY ACTION, SEALED, SNAP-ACTION, DOUBLE BREAK Makes and breaks every time Less than 25m contact Style P3-6 with Style P3-3 resistance because the OTTO design features inherent rocking Push-Pull action that breaks welds and wipes contacts clean. Style P3-7 Action The P3 is the commercial version of the P1 Pushbutton switch, offering vastly improved life under extreme conditions found in some industrial environments. The pushbutton is sealed by a silicone boot operating on our patented rolling sleeve, providing longer life and smoother operation over a wide temperature range. Epoxy protects the contacts and terminals from hostile environments and solder flux. Style P3-8 Style P3-6 High contact force (120g/4.2 oz), low contact resistance Style P3-3 with (25m max) and short contact bounce are the result of our snap- High action mechanism. These characteristics provide exceptional Force current carrying capabilities over the life of the switch. With the Push-Pull Action optional low level (gold plate) configuration, the P3 is well suited to interface directly to computers and other solid state devices. Watertight sealing is available by simply adding W to your part number. Because the P3 is a double break switch, wide CUS connection possibilities, longer life and greater capacity are offered. The P3 design provides a unique terminal connection Standard Characteristics/Ratings: to the moving element for added flexibility. Special versions can be ELECTRICAL RATINGS: provided with five terminals to control up to four circuits. Load Sea Level 28VDC 50,000 feet 28VDC Cycles or 115VAC, 60/400Hz or 115VAC, 60/400Hz Resistive 10A N/A 100,000 Features: Inductive 5A 5A 100,000 Button sealed with patented rolling sleeve principle Lamp 3A N/A 100,000 Contact area sealed at button & terminals Center Contact 3A max N/A 100,000 DWV 1050Vrms 400Vrms Less than 25m contact resistance Low Level 10mA 30mV max DC or peak AC Positive tactile feedback Electrical Life: 25,000 or 100,000 cycles (depending on configuration) Engraved buttons & bezels available High Force Push Pull 5,000 cycles UL recognized & CSA certified Mechanical Life: 1 million cycles, circuit forms 1, 2 & 6 100,000 cycles, circuit forms 3, 4 & 5 1 million mechanical cycle life High Force Push Pull 5,000 cycles Seal: IP64 or IP68S and IP69K Watertight to IP68S available in all versions IP64 or IP68S on push-pull versions Watertight to IP69K available in non push-pull versions Shock: MIL-STD-202, method 207 RoHS/WEEE/Reach compliant Operating Temp Range: -55C to +85C, High Force Push Pull -40C to +85C Operating Force: 2.5 lbs. or 4.0 lbs. Push-Pull: .5 to 2.0 lbs. Push-Pull High Force: 3.0 lbs. min. P3 PART NUMBER CODE Reset Force: 0.75 lb. min or 1.0 lb. P3 X X X X X * Total Travel: 0.085 +/- 0.015 inches Overtravel: 0.012 inches min Case Style Terminal Circuit Operating Button Movement Differential: 0.015 inches min Style/Rating Form Force/Action Color 1. Style 1 1. Solder/Std. 1. N.O. 1. 2.5 lbs./Momentary 1. Red MATERIALS: 3. Style 3 2. Screw/Std. 2. N.C. 2. 4.0 lbs./Momentary 2. Black Case: Anodized aluminum alloy 6. Style 6 3. Solder/Low Level 3. N.C. 3 Terminal 3. Push-Pull 3. Orange 7. Style 7 4. Screw/Low Level 4. N.O. 3 Terminal 4. Push-Pull 4. Yellow Button: Thermoplastic 8. Style 8 5. 5 Terminal High Force** 5. Green Terminals: Brass with silver, gold for low level 6. 2 Circuit 6. Blue Terminal Hardware: Screws, lockwasher and terminal lug for screw terminal option 7. Purple 8. Gray Mounting Hardware: Hex nut, lockwasher and panel seal when applicable 9. White * Add W suffix for watertight to IP68S and IP69K for Operating Force/Action selections 1 and 2. Add W suffix for watertight to IP68S for Operating Force/Action selections 3 and 4. **Available in Case Style 3 only. 136 OTTO Full Line Catalog Specifications Subject To Change Without NoticePUSHBUTTONS P3 COMMERCIAL COMMERCIAL GRADE PUSHBUTTONS PUSHBUTTONS IDEAL FOR USE IN HEAVY MACHINERY & COMMERCIAL APPLICATIONS Style P3-11 2 Style P3-33 3 Push-Pull (.65) .78 1.375 MAX156 MIN156 MIN57 .35 .062 .062 .375.015 FROM FROM POTTING POTTING .250 2-56 UNC-2B .500 .56 .375 .563 5/8-24 UNEF-2A TO WITHIN .062 5/8-24 UNEF-2A OF SHOULDER (.12) TO WITHIN .062 SHOULDER Style P3-33 4 Push-Pull High Force Style P3-61 1 1.375 MAX. 1.54 MAX060 .44 .156 MIN187 .312 .015 FROM POTTING .156 MIN07 FROM POTTING .372 .563 .375 .015 .563 2-56 UNC-2B 5/8-24-UNEF-2A 5/8-24UNEF-2A TO WITHIN .062 R.047 TO WITHIN .062 OF SHOULDER .38 .156 OF SHOULDER Style P3-71 3 Style P3-83 1 Specifications Subject To Change Without Notice www.ottoexcellence.com 137