Conductive Polymer Tantalum Solid Capacitors UPGRADE Surface Mount Type TPC series Features Low profile (Height 1.1 mm max. RoHS compliance, Halogen free Specifications Size code B1 D2 Category temp. range 55 to +105 Rated volt. range 6.3 V to 12.5 V 6.3 V to 10 V Category volt. range 5.0 V to 10 V 6.3 V to 10 V Rated cap. range 10 F to 47 F 68 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current Please see the attached characteristics list Dissipation factor(tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.15 +105 2000 h (B1 size : 1000 h) , rated voltage appled Rated temp. +85 1000 h rated voltage applied Endurance Capacitance change Within 20 % of the initial value Dissipation factor(tan ) 1.5 times of the initial limit Leakage current Within the initial limit +60 , 90 % to 95 % RH, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, 20 % of the initial value (Steady State) Dissipation factor(tan ) 1.5 times of the initial limit Leakage current 3 times of the initial limit Marking Dimensions (not to scale) B1 size D2 size L Rated capacitance code Rated capacitance (F) Polarity marking (+) Polarity marking (+) Rated voltage code Lot No. Rated voltage code Lot No. R. voltage code UnitV j 6.3 A 10 S S W1 k 8.0 B 12.5 Unit B1 size R. capacitance code UnitF Size code L0.2 W0.2 H0.1 S0.2 W10.1 A7 10 J7 22 S7 47 B1 3.5 2.8 1.1 0.8 2.2 E7 15 N7 33 D2 7.3 4.3 1.9 1.3 2.4 * Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09-Jul-21 W HConductive Polymer Tantalum Solid Capacitors TPC series Characteristics list Case size Floor life Specifications Standard Cate- level Rated Cate- Rated Rated gory temper- gory capaci- Size Min. *1 voltage temper- Ripple *4 Reflow Reflow *2 ature voltage tance packaging code LC ESR *3 (V) ature temp temp L W H Part number tan current q ty () (V) (F) (m max.) (A) 260 250 () (mA rms) (pcs) 85 5.0 105 3.5 2.8 1.1 1100 55 0.10 29.6 6TPC47M 3000 47 B1 3 85 5.0 105 3.5 2.8 1.1 1000 70 0.10 29.6 6TPC47MB 3000 6.3 105 6.3 105 100 7.3 4.3 1.9 1700 45 0.10 63.0 6TPC100M 3000 105 6.3 105 150 7.3 4.3 1.9 D2 1900 40 0.10 94.5 6TPC150M 3000 2a 85 5.0 105 330 7.3 4.3 1.9 1900 40 0.10 207.9 6TPC330MA 3000 85 6.3 105 22 3.5 2.8 1.1 B1 1000 70 0.10 17.6 8TPC22M 3000 3 8.0 105 8.0 105 150 7.3 4.3 1.9 1900 40 0.10 120.0 8TPC150M 3000 105 10 105 7.3 4.3 1.9 1700 45 0.10 68.0 10TPC68M 3000 3 NEW 105 10 105 68 7.3 4.3 1.9 1450 60 0.10 68.0 10TPC68MM 3000 NEW 105 10 105 7.3 4.3 1.9 D2 1100 100 0.10 68.0 10TPC68ME 3000 2a 10 105 10 105 7.3 4.3 1.9 1700 45 0.10 100.0 10TPC100M 3000 NEW 105 10 105 100 7.3 4.3 1.9 1600 50 0.10 100.0 10TPC100MT 3000 NEW 105 10 105 7.3 4.3 1.9 1500 55 0.10 100.0 10TPC100MG 3000 85 10 105 10 3.5 2.8 1.1 800 80 0.10 12.5 12TPC10M 3000 12.5 B1 3 85 10 105 15 3.5 2.8 1.1 800 80 0.10 18.8 12TPC15M 3000 *1: Ripple current100 kHz / +45 *2: ESR100 kHz / +20 *3: tan (120 Hz / +20 ) *4: After 5 minutes Please refer to each page in this catarog for Reflow conditions ,Taping specifications andFloor life leve . Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 09-Jul-21