Low Prole Micro-ISO CV-N RELAYS Automotive Relay FEATURES <Protective construction> Low prole automotive relays for Micro-ISO terminal Sealed Compact and high-capacity load switching TYPICAL APPLICATIONS 22.5 15 .886 .591 Headlights, Magnetic clutches, Radiator fans, Blowers, Fog lamps, Tail lights, Heaters, Defoggers, Condenser 15.7 .618 fans, etc. (Unit: mm inch) RoHS compliant ORDERING INFORMATION ACVN Contact arrangement 5: 1 Form A Mounting classification 1: Micro ISO plug-in type Protective element 0: None 2: With resistor inside Rated coil voltage, DC 12: 12 V TYPES Packing Contact arrangement Rated coil voltage Part No. Carton Case 1 Form A 12 V DC ACVN51012 50 pcs. 200 pcs. Note: Please use ACVN2 to order with resistor inside type. (Asterisks should be lled in from ORDERING INFORMATION.) ASCTB297E 201709-T 1CV-N (ACVN) RATING 1. Coil data Release (Reset) Rated coil Operate (Set) voltage Rated operating current Coil resistance Rated operating power voltage Usable voltage range voltage (at 20C 68F) (Initial) 10% (at 20C 68F) 10% (at 20C 68F) (at 20C 68F) (at 20C 68F) (Initial) 66.7 mA, 180, 800 mW, 12V DC Max. 7.0 V DC Min. 0.5 V DC 74.7 mA (with resistor 160.7 (with resistor 900 mW (with resistor 10 to 16V DC inside) inside) inside) 2. Specications Item Specications Contact arrangement 1 Form A Contact resistance (initial) Max. 15m (Typ. 3m) (By voltage drop 1A 6V DC) Contact material Ag alloy Rated switching capacity N.O. side: 35 A 14V DC Contact data (resistive) 1 Max. carrying current* N.O. side: 20 A 14V DC (at 85C 185F, continuous) Min. switching load 1 A 14V DC (at 20C 68F) 2 (resistive)* Contact voltage drop (initial) N.O. side: Max. 0.5 V (By voltage drop 14 V DC 35 A) Insulated resistance (initial) Min. 20 M (at 500V DC, Measurement at same location as Dielectric strength section.) Between open contacts 500 Vrms for 1 min. (Detection current: 10mA) Dielectric strength (initial) Between contacts and coil 500 Vrms for 1 min. (Detection current: 10mA) Operate (Set) time Max. 10ms (at 20C 68F, without contact bounce time) Time (at rated coil voltage) characteristics Release (Reset) time (initial) Max. 10ms (at 20C 68F, without contact bounce time) (Without diode) (at rated coil voltage) 2 Functional Min. 100 m/s approx. 10G (Half-wave pulse of sine wave: 11ms detection time: 10s) Shock 2 resistance Destructive Min. 1,000 m/s approx. 100G (Half-wave pulse of sine wave: 6ms) 2 Functional 10 to 100 Hz, Min. 44.1 m/s approx. 4.5G (Detection time: 10s) Vibration 2 resistance Destructive 10 to 500 Hz, Min. 44.1 m/s approx. 4.5G , Time of vibration for each direction X, Y, Z direction: 4 hours 6 Mechanical Min. 10 (at 120 cpm) <Resistive load> 5 Min. 10 at rated switching capacity, operating frequency: 2s ON, 2s OFF Expected life <Motor load> Electrical 5 Min. 3 10 at inrush 84 A, steady 18 A, 14 V DC, Operating frequency: 2s ON, 5s OFF <Lamp load> 5 Min. 2 10 at inrush 84 A, steady 12 A, 14 V DC, Operating frequency: 1s ON, 14s OFF Conditions for usage, 4 Conditions Ambient temperature: 40 to +85C 40 to +185F* , Humidity: 5 to 85% R.H. (Please avoid icing or condensation) 3 transport and storage* Weight Approx. 12 g .42 oz Notes: *1. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you conrm operation under actual conditions. *2. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *3. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. For details, please refer to the Automotive Relay Users Guide. *4. Please inquire our sales representative if you will be using the relay in a high temperature atmosphere. ASCTB297E 201709-T 2