DIP8-pin type featuring
low on-resistance
RF 2 Form A
200V/400V load voltage
Low on-resistance (AQW22N)
FEATURES
6.4
1. 2-channels (Form A) type with high 6. Controls low-level analog signals:
9.78
.252
.385
3.90.2 response speed, low leakage current PhotoMOS features extremely low
.154.008
and low on-resistance. closed-circuit offset voltages to enable
2. Applicable for 2 Form A use as well control of small analog signals without
6.4
as two independent 1 Form A use distortion.
9.78
.252
.385
3.60.2 3. Low capacitance between output
Height includes .142.008
terminals ensures high response
standoff
speed:
TYPICAL APPLICATIONS
The capacitance between output
mm inch
terminals is small; typ. 10 pF. Measuring instruments
This enables for a fast operation speed of Scanner, IC checker, Board tester, etc.
typ. 0.2 ms.
1 8
4. High sensitivity and low on-
2 7
resistance:
3 6
Max. 0.07 A of load current can be
4 5
controlled with input current of 5 mA.
The on-resistance is less than our
conventional models.
5. Low-level off state leakage current
RoHS compliant
TYPES
Part No.
Output rating* Packing quantity
Through hole
Surface-mount terminal
terminal
Package
Tape and reel packing style
Load Load
Tube packing style Tube Tape and reel
Picked from the Picked from the
voltage current
1/2/3-pin side 4/5/6-pin side
1 tube contains:
200 V 50 mA AQW227N AQW227NA AQW227NAX AQW227NAZ
AC/DC 50 pcs.
DIP8-pin 1,000 pcs.
dual use 1 batch contains:
400 V 40 mA AQW224N AQW224NA AQW224NAX AQW224NAZ
500 pcs.
*Indicate the peak AC and DC values.
Note: The surface mount terminal indicator A and the packing style indicator X or Z are not marked on the device.
RATING
1. Absolute maximum ratings (Ambient temperature: 25C 77F)
Item Symbol AQW227N(A) AQW224N(A) Remarks
LED forward current IF 50 mA
LED reverse voltage VR 5 V
Input
Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1%
Power dissipation Pin 75 mW
Load voltage (peak AC) VL 200 V 400 V
0.05 A 0.04 A Peak AC, DC
Continuous load current IL
(0.07 A) (0.05 A) ( ): in case of using only 1 channel
Output
A connection: 100 ms (1 shot),
Peak load current Ipeak 0.15 A 0.12 A
VL = DC
Power dissipation Pout 800 mW
Total power dissipation PT 850 mW
I/O isolation voltage Viso 1,500 V AC
Non-condensing at low
Operating Topr 40C to +85C 40F to +185F
Temperature
temperatures
limits
Storage Tstg 40C to +100C 40F to +212F
ASCTB57E 201404-T
1RF 2 Form A Low on-resistance (AQW22N)
2. Electrical characteristics (Ambient temperature: 25C 77F)
Item Symbol AQW227N(A) AQW224N(A) Remarks
Typical 0.9 mA
LED operate current IFon IL = Max.
Maximum 3.0 mA
Minimum 0.4 mA
Input LED turn off current IFoff IL = Max.
Typical 0.8 mA
Typical 1.25 V (1.14 V at IF = 5 mA)
LED dropout voltage VF IF = 50 mA
Maximum 1.5 V
IF = 5 mA
Typical 30 70
On resistance Ron IL = Max.
Maximum 50 100
Within 1 s on time
IF = 0
Typical 10 pF
Output
Output capacitance Cout VB = 0
Maximum 15 pF
f = 1 MHz
IF = 0
Off state leakage current Maximum ILeak 10 nA (1 nA or less)*
VL = Max.
Typical 0.2 ms
IF = 5 mA
Turn on time** Ton
IL = Max.
Maximum 0.5 ms
Typical 0.08 ms
IF = 5 mA
Turn off time** Toff
Transfer
IL = Max.
Maximum 0.2 ms
characteristics
Typical 0.8 pF
f = 1 MHz
I/O capacitance Ciso
VB = 0
Maximum 1.5 pF
Initial I/O isolation resistance Minimum Riso 1,000 M 500 V DC
*Available as custom orders (1 nA or less)
**Turn on/Turn off time
Input
90%
Output 10%
Ton Toff
RECOMMENDED OPERATING CONDITIONS
Please obey the following conditions to ensure proper device operation and resetting.
Item Symbol Recommended value Unit
Input LED current IF 5mA
These products are not designed for automotive use.
If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation
technical representative.
REFERENCE DATA
1. Load current vs. ambient temperature 2. On resistance vs. ambient temperature 3. Turn on time vs. ambient temperature
characteristics characteristics characteristics
Allowable ambient temperature: 40C to +85C Measured portion: between terminals 5 and 6, LED current: 5 mA; Load voltage: Max. (DC);
40F to +185F 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC)
When using 2 channels Continuous load current: Max. (DC)
140
120 1.0
120
100
0.8
100
AQW224N
80
0.6
80
60
60
0.4
AQW227N
AQW227N
40
AQW224N
40 AQW227N
0.2
AQW224N
20
20
0 0
0
40 20 020 40 60 80 85 100
40 20 0 20 40 60 80 85 40 20 020 40 60 8085
Ambient temperature, C Ambient temperature, C Ambient temperature, C
ASCTB57E 201404-T
2
Load current, mA
On resistance,
Turn on time, ms