Aluminum Electrolytic Capacitors Surface Mount Type FK series Features Endurance105 2000 h to 5000 h Low impedance40 % to 60 % less than FC series Miniaturized (30 % to 50 % less than FC series) Vibration-proof product (30G guaranteed) is available upon request6.3 AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 6.3 V to 100 V Capacitance range 3.3 F to 6800 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current I 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Characteristics Z (25 ) / Z (+20 ) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (40 ) / Z (+20 ) 3 3 3 3 3 3 3 3 3 at low temperature Z (55 ) / Z (+20 ) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 2 and then being stabilized at +20 , capacitors shall meet the following limits. 12.5 and suffix G in 810.2, 1010.2 are 5000 hours Endurance Capacitance change Within 30 % of the initial value (Suffix G is 35 %) Dissipation factortan ) 200 % of the initial limit (Suffix G is 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10 % of the initial value soldering heat Dissipation factortan ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1 k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 Marking Dimensions Example : 6.3 V 22 F, 6.3 V 3300 F 0.3 max. A0.2 Marking color : BLACK Negative polarity marking () 10 Capacitance (F) Series identification 22 j FK Mark for Lead-Free Rated voltage code L W Lot number 12.5 Pressure Relief (10 and larger) Reference size Negative polarity marking () Unitmm Capacitance (F) Size code D L A, B H I W P K 3300 +0.15 j FK B 4.0 5.80.3 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 0.20 Series identification +0.15 C 5.0 5.80.3 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 0.20 +0.15 Rated voltage code D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 0.20 +0.15 Lot number D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 0.20 +0.15 R. voltage code UnitV E 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 0.20 j 6.3 H 50 F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 A 10 J 63 G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 C 16 K 80 H13 12.5 13.50.5 13.5 15.0 max. 4.7 0.900.3 4.4 0.700.3 E 25 2A 100 J16 16.0 16.50.5 17.0 19.0 max. 5.5 1.200.3 6.7 0.700.3 V 35 K16 18.0 16.50.5 19.0 21.0 max. 6.7 1.200.3 6.7 0.700.3 The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 D0.5 H B0.2 K I P I , < D, D8 > < E, F, G, H13, J16, K16, K21 > F A0.2 F A0.2 T T *1 L L0.3 W W *1E ~ G : L0.3 ( ) ( ) H13 ~ K21: L0.5 H D L A, B F I W P K R S T max. +0.15 D 6.3 6.1 6.6 7.8 0 +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 0.20 +0.15 D8 6.3 8.0 6.6 7.8 0 +0.15 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 0.20 +0.15 E 8.0 6.5 8.3 9.5 0 +0.15 3.4 0.70.1 2.2 0.35 0.700.2 5.3 1.70.2 0.20 F 8.0 10.5 8.3 10.0 0 +0.15 3.4 1.20.2 3.1 0.700.2 0.700.2 5.3 1.30.2 G 10.0 10.5 10.3 12.0 0 +0.15 3.5 1.20.2 4.6 0.700.2 0.700.2 6.9 1.30.2 H13 12.5 13.8 13.5 15.0 0.1 +0.15 4.7 1.20.2 4.4 0.700.3 2.20.2 7.1 2.40.2 J16 16.0 16.8 17.0 19.0 0.1 +0.15 5.5 1.40.2 6.7 0.700.3 3.00.2 9.0 1.90.2 K16 18.0 16.8 19.0 21.0 0.1 +0.15 6.7 1.40.2 6.7 0.700.3 3.00.2 11.0 1.90.2 K21 18.0 21.8 19.0 21.0 0.1 +0.15 6.7 1.40.2 6.7 0.700.3 3.00.2 11.0 1.90.2 , , , a b c c B (4) 1.0 2.5 1.6 C (5) 1.5 2.8 1.6 D (6.3) 1.8 3.2 1.6 D8 (6.3x7.7L) 1.8 3.2 1.6 E (8x6.2L) 2.2 4.0 1.6 F (8x10.2L) 3.1 4.0 2.0 G (10x10.2L) 4.6 4.1 2.0 H (12.5) 4.0 5.7 2.0 J (16) 6.0 6.5 2.5 K (18) 6.0 7.5 2.5 a, , C < D, D8 > G H G A B C D E F G H C 0.95 0.65 D (6.3xL6.1 1.2 3.6 3.2 2.0 1.0 1.2 D8 (6.3xL8.0 1.2 3.6 3.2 2.0 0.95 0.65 1.0 1.2 E (8x6.5L) 1.8 4.2 5.0 1.3 1.5 1.4 1.5 2.0 F (8x10.5L) 2.7 4.0 4.7 1.3 1.0 1.7 1.1 2.5 G (10) 3.9 4.4 4.7 1.3 1.2 1.9 1.1 2.5 H (12.5) 3.9 6.0 6.9 2.8 1.3 1.9 2.2 2.5 J (16) 5.8 6.8 6.2 3.6 1.3 1.9 1.7 2.8 K (18) 5.8 7.3 6.2 3.6 1.8 1.9 1.7 2.8 A, , < E, F, G, H, J, K > C C G H G , , , 6.3 , 2019/4/26 D0.5 H B A B b a b B A B B0.2 (S) R K (P) (I) (I) E D F E D F A B A B D0.5 H B0.2 (S) R K (I) (P) (I)