EEE-FT1C821UL

Aluminum Electrolytic Capacitors NEW Surface Mount Type Halogen-free FT series V type High temperature Lead-Free reflow Features Country of origin Endurance105 2000 h Malaysia Miniaturized, Low ESR (1 size smaller than series FK) AEC-Q200 compliant RoHS compliant Specifications Category temp. range 55 to +105 Rated voltage range 6.3 V to 50 V Capacitance range 47 F to 2200 F Capacitance tolerance 20 % (120 Hz / +20 ) Leakage current I 0.01 CVAAfter 2 minutes Dissipation factor (tan ) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 Characteristics Z (25 ) / Z (+20 ) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z (40 ) / Z (+20 ) 3 3 3 3 3 3 Z (55 ) / Z (+20 ) 4 4 4 3 3 3 After applying rated working voltage for 2000 hours at +105 2 and then being stabilized at +20 , capacitors shall meet the following limits. Endurance Capacitance change Within 30 % of the initial value Dissipation factortan ) 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 , capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10 % of the initial value soldering heat Dissipation factortan ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.Hz) 120 1 k 10 k 100 k to Cap.F 47 to 470 0.65 0.85 0.95 1.00 560 to 2200 0.70 0.90 0.95 1.00 Marking Dimensions Example6.3 V 330 F 0.3 max. A0.2 Marking color : BLACK Negative polarity marking () Capacitance (F) 330 Series identification j FT L W Rated voltage code Pressure Relief (10 and larger) Reference size Unitmm Size code D L A, B H I W P K Lot number +0.15 D 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 R.voltage code UnitV 0.20 +0.15 j 6.3 E 25 D8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 0.20 F 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.2 A 10 V 35 C 16 H 50 G 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20 D0.5 H B0.2 H K I P IAluminum Electrolytic Capacitors (SMD Type) FT-HF series Characteristics list Endurance : 105 2000 h Min. Case size Specification (mm) Packaging Rated Capacitance Size Q ty voltage Part number Reflow (20 %) Ripple code *2 (V) ESR *3 *1 (F) Taping D L tan current (pcs) (mA rms) 330 6.3 5.8 D 300 0.26 0.26 EEEFT0J331AL (5) 1000 470 6.3 7.7 D8 600 0.16 0.26 EEEFTJ471XAL (5) 900 6.3 680 6.3 7.7 D8 600 0.16 0.26 EEEFTJ681XAL (5) 900 1500 8.0 10.2 F 850 0.08 0.26 EEEFT0J152AL (6) 500 2200 10.0 10.2 G 1190 0.06 0.28 EEEFT0J222AL (6) 500 220 6.3 5.8 D 300 0.26 0.19 EEEFT1A221AL (5) 1000 330 6.3 7.7 D8 600 0.16 0.19 EEEFTA331XAL (5) 900 10 470 6.3 7.7 D8 600 0.16 0.19 EEEFTA471XAL (5) 900 1000 8.0 10.2 F 850 0.08 0.19 EEEFT1A102AL (6) 500 1500 10.0 10.2 G 1190 0.06 0.19 EEEFT1A152AL (6) 500 150 6.3 5.8 D 300 0.26 0.16 EEEFT1C151AL (5) 1000 220 6.3 5.8 D 300 0.26 0.16 EEEFT1C221AL (5) 1000 330 6.3 7.7 D8 600 0.16 0.16 EEEFTC331XAL (5) 900 16 680 8.0 10.2 F 850 0.08 0.16 EEEFT1C681AL (6) 500 820 8.0 10.2 F 850 0.08 0.16 EEEFT1C821UL (6) 500 1000 10.0 10.2 G 1190 0.06 0.16 EEEFT1C102AL (6) 500 1200 10.0 10.2 G 1190 0.06 0.16 EEEFT1C122UL (6) 500 100 6.3 5.8 D 300 0.26 0.14 EEEFT1E101AL (5) 1000 150 6.3 7.7 D8 600 0.16 0.14 EEEFTE151XAL (5) 900 220 6.3 7.7 D8 600 0.16 0.14 EEEFTE221XAL (5) 900 25 470 8.0 10.2 F 850 0.08 0.14 EEEFT1E471AL (6) 500 560 8.0 10.2 F 850 0.08 0.14 EEEFT1E561UL (6) 500 820 10.0 10.2 G 1190 0.06 0.14 EEEFT1E821AL (6) 500 1000 10.0 10.2 G 1190 0.06 0.14 EEEFT1E102UL (6) 500 68 6.3 5.8 D 300 0.26 0.12 EEEFT1V680AL (5) 1000 100 6.3 5.8 D 300 0.26 0.12 EEEFT1V101AL (5) 1000 150 6.3 7.7 D8 600 0.16 0.12 EEEFTV151XAL (5) 900 35 330 8.0 10.2 F 850 0.08 0.12 EEEFT1V331AL (6) 500 390 8.0 10.2 F 850 0.08 0.12 EEEFT1V391UL (6) 500 560 10.0 10.2 G 1190 0.06 0.12 EEEFT1V561AL (6) 500 680 10.0 10.2 G 1190 0.06 0.12 EEEFT1V681UL (6) 500 47 6.3 5.8 D 195 0.68 0.10 EEEFT1H470AL (5) 1000 100 6.3 7.7 D8 350 0.34 0.10 EEEFTH101XAL (5) 900 50 220 8.0 10.2 F 670 0.08 0.10 EEEFT1H221AL (6) 500 330 10.0 10.2 G 900 0.12 0.10 EEEFT1H331AL (6) 500 *1: Ripple current (100 kHz / +105 *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) If Part number exceeds 12 digits, voltage code is abbreviated as follows 0J J, 1A A, 1C C, 1E E, 1V V, 1H H Please refer to the page ofReflow Profil andThe Taping Dimension. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-20