EEF-SR0D221R4 Panasonic

Conductive Polymer Aluminum Electrolytic Capacitors Surface Mount Type SR/LR/SS/LS/ST/LT series Features Low profile (Height 1.0 mm max.) Low ESR (4.5 m to 9 m max.) Low ESL (3-terminals : 50% less then 2-terminals) LR/LS/LT series High ripple current (8500 mA rms max.) RoHS compliance, Halogen free Specifications Series SR LR SS LS ST LT Category temp. range 55 to +105 Rated voltage range 2.0 V to 6.3 V 2.0 V to 2.5 V Rated cap. range 68 F to 220 F 180 F to 220 F 270 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.1 CV (A)2 minutes Dissipation factor (tan ) 0.06 (120 Hz / + 20 ) Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +105 2000 h, rated voltage applied Capacitance change Within 20 % of the initial value Endurance Dissipation factor (tan ) 2 times of the initial limit DC leakage current 3 times of the initial limit +60 , 90 % RH, 500 h, No-applied voltage Capacitance change of 2.0 V to 2.5 V 4.0 V 6.3 V Damp heat +70 %, 20 % +60 %, 20 % +50 %, 20 % initial measurd value (Steady state) Dissipation factor (tan ) 2 times of the initial limit DC leakage current Within the initial limit Marking Capacitance (F Polarity bar (Positive) R. voltage code UnitV d 2.0 e 2.5 g 4.0 j 6.3 Lot No. R. voltage code Dimensions (not to scale) SR/SS/ST series P Unit P W1 L Series L0.2 W10.2 W20.1 H0.1 P0.3 2 terminals *1 SR 7.3 4.3 2.4 1.3 1.0 SS 7.3 4.3 2.4 1.1 1.3 ST 7.3 4.3 2.4 1.4 1.3 *1:max. LR/LS/LT series L W1 Unit P4 Series L0.2 W10.2 W20.1 H0.1 P10.3 P20.1 P30.2 P40.2 3 terminals *1 LR 7.3 4.3 2.4 1.3 1.1 0.7 1.4 1.0 LS 7.3 4.3 2.4 1.1 1.3 1.1 0.7 1.4 LT 7.3 4.3 2.4 1.4 1.3 1.1 0.7 1.4 *1:max. Externals of figure are the reference. P1 P3 P2 P1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Nov-16 W2 W2 W2 W2 H HSR/LR/SS/LS/ST/LT series Characteristics list The number Case size (mm) Specification of terminals Min. Rated Packaging Capacitance Ripple Series voltage Part number *2 *3 (F) ESR Qty *1 (V) L W H 2 3 current (m max.) (pcs) (mA rms) 1.0 max. 7.3 4.3 7500 6 EEFSR0D221R 3500 2.0 220 7.3 4.3 1.0 max. 8500 4.5 EEFSR0D221R4 3500 7.3 4.3 1.0 max. 7500 6 EEFSR0E181R 3500 SR 2.5 180 7.3 4.3 1.0 max. 8500 4.5 EEFSR0E181R4 3500 4.0 120 7.3 4.3 1.0 max. 6300 9 EEFSR0G121R 3500 6.3 68 7.3 4.3 1.0 max. 6300 9 EEFSR0J680R 3500 7.3 4.3 1.0 max. 7500 6 EEFLR0D221R 3500 2.0 220 7.3 4.3 1.0 max. 8500 4.5 EEFLR0D221R4 3500 7.3 4.3 1.0 max. 7500 6 EEFLR0E181R 3500 LR 2.5 180 max. 7.3 4.3 1.0 8500 4.5 EEFLR0E181R4 3500 1.0 max. 4.0 120 7.3 4.3 6300 9 EEFLR0G121R 3500 1.0 max. 6.3 68 7.3 4.3 6300 9 EEFLR0J680R 3500 2.0 220 7.3 4.3 1.1 7500 6 EEFSS0D221R 3500 SS 2.5 180 7.3 4.3 1.1 7500 6 EEFSS0E181R 3500 2.0 220 7.3 4.3 1.1 7500 6 EEFLS0D221R 3500 LS 2.5 180 7.3 4.3 1.1 7500 6 EEFLS0E181R 3500 2.0 330 7.3 4.3 1.4 7500 6 EEFST0D331R 3500 ST 2.5 270 7.3 4.3 1.4 7500 6 EEFST0E271R 3500 2.0 330 7.3 4.3 1.4 7500 6 EEFLT0D331R 3500 LT 2.5 270 7.3 4.3 1.4 7500 6 EEFLT0E271R 3500 *1: Ripple current (100 kHz / +45 ) *2: ESR (100 kHz / +20 ) *3: Please contact us when 500 pcs packing is necessary. Please refer to each page in this catarog for Reflow conditions and Taping specifications. Temperature coefficient of ripple current Temperature T 45 45 < T 85 85 < T 105 2.0 V to 6.3 V Coefficient 1.0 0.7 0.25 Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 29-Nov-16