Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type ZA series Hybrid High temperature lead-free reflow Features Endurance : 10000 h at 105 Low ESR and high ripple current (70 % over, Lower ESR than current V-FP) High voltage (to 80 V) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) Vibration-proof product is available upon request. New lineup of 6.3 product. (6.3, 8, 10) AEC-Q200 compliant RoHS compliant Specifications Size code C D D8 F G Category temp. range 55 to +105 Rated voltage range 25 V to 50 V 25 V to 63 V 25 V to 80 V Nominal cap.range 10 F to 33 F 10 F to 56 F 22 F to 100 F 22 F to 220 F 33 F to 330 F Capacitance tolerance 20 % (120 Hz / +20 ) DC leakage current I 0.01 CV or 3 (A) After 2 minutes (whichever is greater) Dissipation factor (tan ) Please see the attached characteristics list Surge voltage (V) Rated voltage 1.25 (15 to 35 ) +105 2 , 10000 h, apply the rated ripple current without exceeding the rated voltage. Capacitance change Within 30% of the initial value Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit Endurance DC leakage current Within the initial limit Size code ESR after endurance C D D8 F G ( / 100 kHz)(-40 2.0 1.4 0.8 0.4 0.3 After storage for 1000 hours at +105 2 with no voltage applied and then being Shelf life stabilized at +20 ,capacitors shall meet the limits specified in endurance. (With voltage treatment) +85 2 , 85 % to 90 %RH, 2000 h, rated voltage applied Capacitance change Within 30% of the initial value Damp heat (Load) Dissipation factor (tan ) 200 % of the initial limit ESR 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 , capacitors shall meet the following limits. Resistance to Capacitance change Within 10% of the initial value soldering heat Dissipation factor (tan ) Within the initial limit DC leakage current Within the initial limit Marking Dimensions (not to scale) Example : 25 V 33 F Standard 0.3 max. A0.2 Unit Marking color : BLACK Size H D L A, B I W P K code max. +0.15 C 5.0 5.80.3 5.3 6.5 2.2 0.650.1 1.5 0.35 -0.20 +0.15 Negative polarity marking () D 6.3 5.80.3 6.6 7.8 2.6 0.650.1 1.8 0.35 -0.20 +0.15 Capacitance (F) D8 6.3 7.70.3 6.6 7.8 2.6 0.650.1 1.8 0.35 -0.20 L W Series identification F 8.0 10.20.3 8.3 10 3.4 0.900.2 3.1 0.700.2 Pressure relief (10 ) ( ) Reference size G 10.0 10.20.3 10.3 12.0 3.5 0.900.2 4.6 0.700.2 33 Vibration-proof product < Size codeD, D8 > < Size codeF, G > E ZA F A0.2 F A0.2 Rated voltage code T Lot number L T W W L Supportive terminals Pressure relief (10 ) ( ) Reference size Supportive terminals ( ) Reference size R. voltage code UnitV Unit H E 25 Size code D L A, B F I W P K R S T max. +0.15 0 to +0.15 V 35 D 6.3 6.10.3 6.6 7.8 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 -0.20 +0.15 0 to +0.15 H 50 D8 6.3 8.00.3 6.6 7.8 2.4 0.650.1 2.2 0.35 1.10.2 3.3 1.050.2 -0.20 0 to +0.15 J 63 F 8.0 10.50.3 8.3 10.0 3.4 1.20.2 3.1 0.700.2 0.700.2 5.3 1.30.2 K 80 G 10.0 10.50.3 10.3 12.0 0 to +0.15 3.5 1.20.2 4.6 0.700.2 0.700.2 6.9 1.30.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-May-21 D0.5 D0.5 H H B0.2 B0.2 (S) K (I) (P) (I) R K (I) (P) (I) D0.5 H B0.2 (S) R K (I) (P) (I)Conductive Polymer Hybrid Aluminum Electrolytic Capacitors ZA series Characteristics list Endurance : 105 10000 h Min.packaging Case size Specification Part number (mm) q ty (pcs) Rated Capacitance L Size voltage Ripple (20 %) *2 Standard Vibration-proof code ESR *3 *1 (V) D Taping (F) tan current Vibration (m) product product Standard (mA rms) -proof 22 5.0 5.8 - C 900 80 0.14 EEHZA1E220R - 1000 33 5.0 5.8 - C 900 80 0.14 EEHZA1E330R - 1000 47 6.3 5.8 6.1 D 1300 50 0.14 EEHZA1E470P EEHZA1E470V 1000 56 6.3 5.8 6.1 D 1300 50 0.14 EEHZA1E560P EEHZA1E560V 1000 25 68 6.3 7.7 8.0 D8 2000 30 0.14 EEHZA1E680XP EEHZA1E680XV 900 100 6.3 7.7 8.0 D8 2000 30 0.14 EEHZA1E101XP EEHZA1E101XV 900 150 8.0 10.2 10.5 F 2300 27 0.14 EEHZA1E151P EEHZA1E151V 500 220 8.0 10.2 10.5 F 2300 27 0.14 EEHZA1E221P EEHZA1E221V 500 330 10.0 10.2 10.5 G 2500 20 0.14 EEHZA1E331P EEHZA1E331V 500 10 5.0 5.8 - C 900 100 0.12 EEHZA1V100R - 1000 22 5.0 5.8 - C 900 100 0.12 EEHZA1V220R - 1000 27 6.3 5.8 6.1 D 1300 60 0.12 EEHZA1V270P EEHZA1V270V 1000 33 6.3 5.8 6.1 D 1300 60 0.12 EEHZA1V330P EEHZA1V330V 1000 47 6.3 5.8 6.1 D 1300 60 0.12 EEHZA1V470P EEHZA1V470V 1000 35 68 6.3 7.7 8.0 D8 2000 35 0.12 EEHZA1V680XP EEHZA1V680XV 900 100 8.0 10.2 10.5 F 2300 27 0.12 EEHZA1V101P EEHZA1V101V 500 150 8.0 10.2 10.5 F 2300 27 0.12 EEHZA1V151P EEHZA1V151V 500 220 10.0 10.2 10.5 G 2500 20 0.12 EEHZA1V221P EEHZA1V221V 500 270 10.0 10.2 10.5 G 2500 20 0.12 EEHZA1V271P EEHZA1V271V 500 10 5.0 5.8 - C 750 120 0.10 EEHZA1H100R - 1000 22 6.3 5.8 6.1 D 1100 80 0.10 EEHZA1H220P EEHZA1H220V 1000 33 6.3 7.7 8.0 D8 1600 40 0.10 EEHZA1H330XP EEHZA1H330XV 900 50 47 8.0 10.2 10.5 F 1800 30 0.10 EEHZA1H470P EEHZA1H470V 500 68 8.0 10.2 10.5 F 1800 30 0.10 EEHZA1H680P EEHZA1H680V 500 100 10.0 10.2 10.5 G 2000 28 0.10 EEHZA1H101P EEHZA1H101V 500 10 6.3 5.8 6.1 D 1000 120 0.08 EEHZA1J100P EEHZA1J100V 1000 22 6.3 7.7 8.0 D8 1500 80 0.08 EEHZA1J220XP EEHZA1J220XV 900 33 8.0 10.2 10.5 F 1700 40 0.08 EEHZA1J330P EEHZA1J330V 500 63 47 8.0 10.2 10.5 F 1700 40 0.08 EEHZA1J470P EEHZA1J470V 500 56 10.0 10.2 10.5 G 1800 30 0.08 EEHZA1J560P EEHZA1J560V 500 68 10.0 10.2 10.5 G 1800 30 0.08 EEHZA1J680P EEHZA1J680V 500 82 10.0 10.2 10.5 G 1800 30 0.08 EEHZA1J820P EEHZA1J820V 500 22 8.0 10.2 10.5 F 1550 45 0.08 EEHZA1K220P EEHZA1K220V 500 80 33 10.0 10.2 10.5 G 1700 36 0.08 EEHZA1K330P EEHZA1K330V 500 47 10.0 10.2 10.5 G 1700 36 0.08 EEHZA1K470P EEHZA1K470V 500 *1: Ripple current (100 kHz/ +105 ) *2: ESR (100 kHz / +20 ) *3: tan (120 Hz / +20 ) Please refer to the page of Reflow profile and The taping dimensions. The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Frequency correction factor for ripple current Rated capacitanceC Frequency (f) 100 Hz f < 200 Hz 200 Hz f < 300 Hz 300 Hz f < 500 Hz 500 Hz f < 1 kHz C < 47 F 0.10 0.10 0.15 0.20 Correction 47 F C < 150 F 0.15 0.20 0.25 0.30 factor 150 F C 0.15 0.25 0.25 0.30 Rated capacitanceC Frequency (f) 1 kHz f < 2 kHz 2 kHz f < 3 kHz 3 kHz f < 5 kHz 5 kHz f < 10 kHz C < 47 F 0.30 0.40 0.45 0.50 Correction 47 F C < 150 F 0.40 0.45 0.55 0.60 factor 150 F C 0.45 0.50 0.60 0.65 Rated capacitanceC Frequency (f) 10 kHz f < 15 kHz 15 kHz f < 20 kHz 20 kHz f < 30 kHz 30 kHz f < 40 kHz C < 47 F 0.60 0.65 0.70 0.75 Correction 47 F C < 150 F 0.70 0.75 0.80 0.80 factor 150 F C 0.75 0.80 0.85 0.85 Rated capacitanceC Frequency (f) 40 kHz f < 50 kHz 50 kHz f < 100 kHz 100 kHz f < 500 kHz 500 kHz f C < 47 F 0.80 0.85 1.00 1.05 Correction 47 F C < 150 F 0.85 0.90 1.00 1.00 factor 150 F C 0.85 0.90 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 10-May-21