Aluminum Electrolytic Capacitors/ HD
Radial Lead Type
Series: Type:
HD A
Features
Endurance : 105 C 1000 h to 2000 h
Minaturize, Higher Capacitance :
1 Size Miniturized Product of Current A-NHG
RoHS directive compliant
Specifi cations
Category Temp. Range 55 C to +105 C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 2.2 F to 22000 F
Capacitance Tolerance 20 % (120 Hz/+20 C)
I < 0.01 CV or 3 (A) After 2 minutes
DC Leakage Curre nt
(Which is greater)
tan Please see the attached standard products list
d
After following life test with DC voltage and +105 C2 C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 C, the capacitors shall meet the limits speci ed below.
Duration : 05 to 08=1000 hours, 010 to 018=2000 hours
Endurance
Capacitance change 20 % of initial measured value
tan d < 200 % of initial speci ed value
DC leakage current < initial speci ed value
After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized
Shelf Life
at +20 C, capacitors shall meet the limits speci ed in Endurance. (With voltage treatment)
Frequency correction factor for ripple current
Frequency (Hz)
W.V.(V.DC) Cap. (F)
60 120 1 k 10 k 100 k
2.2 to 33 0.75 1.00 1.55 1.80 2.00
10 to 50 47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
Di men sions in mm (not to scale)
(Unit : mm)
Sleeve
08 010
Pressure relief
+
06.3
=
0D0.5 0D0.5
L 14 min. 3 min.
= L 16 : L1.5
L 20 : L2.0
Body Dia. 0D 5 6.3 8 10 12.5 16 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
EEE-104
fd0.05
F0.5Aluminum Electrolytic Capacitors/ HD
Standard Prod ucts Endurance : 105 C 05 to 08=1000 h, 010 to 018=2000 h
Case size Speci cation Lead Length Min. Packaging Q'ty
Ripple tan d Endur- Lead Lead Space
Cap.
W.V.
Current ance Dia. Straight
(20 %)
Dia. Length Part No. Taping
Taping Taping
(120 Hz) (120 Hz) Leads
Straight
B H
(+105 C) (+20 C)
(V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 EEUHD1A331( ) 200 2000
470 8 11.5 250 0.24 1000 0.6 3.5 5.0 EEUHD1A471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 EEUHD1A102( ) 200 500
2200 10 16 760 0.26 2000 0.6 5.0 5.0 EEUHD1A222( ) 200 500
10 4700 12.5 20 1260 0.30 2000 0.6 5.0 5.0 EEUHD1A472( ) 200 500
6800 12.5 25 1570 0.34 2000 0.6 5.0 5.0 EEUHD1A682( ) 200 500
10000 16 25 1890 0.42 2000 0.8 7.5 7.5 EEUHD1A103( ) 100 250
15000 16 31.5 2180 0.52 2000 0.8 7.5 EEUHD1A153 100
22000 18 35.5 2400 0.66 2000 0.8 7.5 EEUHD1A223 50
100 5 11 110 0.20 1000 0.5 2.5 5.0 2.5 EEUHD1C101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 EEUHD1C221( ) 200 2000
330 8 11.5 260 0.20 1000 0.6 3.5 5.0 EEUHD1C331( ) 200 1000
470 8 11.5 310 0.20 1000 0.6 3.5 5.0 EEUHD1C471( ) 200 1000
3300 12.5 20 1170 0.24 2000 0.6 5.0 5.0 EEUHD1C332( ) 200 500
16
4700 12.5 25 1480 0.26 2000 0.6 5.0 5.0 EEUHD1C472( ) 200 500
6800 16 25 1780 0.30 2000 0.8 7.5 7.5 EEUHD1C682( ) 100 250
8200 16 25 1780 0.34 2000 0.8 7.5 7.5 EEUHD1C822( ) 100 250
10000 16 31.5 2060 0.38 2000 0.8 7.5 EEUHD1C103 100
15000 18 35.5 2210 0.48 2000 0.8 7.5 EEUHD1C153 50
47 5 11 91 0.16 1000 0.5 2.5 5.0 2.5 EEUHD1E470( ) 200 2000
68 5 11 91 0.16 1000 0.5 2.5 5.0 2.5 EEUHD1E680( ) 200 2000
100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 EEUHD1E101( ) 200 2000
220 8 11.5 230 0.16 1000 0.6 3.5 5.0 EEUHD1E221( ) 200 1000
330 8 11.5 310 0.16 1000 0.6 3.5 5.0 EEUHD1E331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 EEUHD1E471( ) 200 500
25 1000 10 16 680 0.16 2000 0.6 5.0 5.0 EEUHD1E102( ) 200 500
2200 12.5 20 1090 0.18 2000 0.6 5.0 5.0 EEUHD1E222( ) 200 500
3300 12.5 25 1400 0.20 2000 0.6 5.0 5.0 EEUHD1E332( ) 200 500
4700 16 25 1750 0.22 2000 0.8 7.5 7.5 EEUHD1E472( ) 100 250
5600 16 25 1750 0.24 2000 0.8 7.5 7.5 EEUHD1E562( ) 100 250
6800 16 31.5 2040 0.26 2000 0.8 7.5 EEUHD1E682 100
10000 18 35.5 2200 0.34 2000 0.8 7.5 EEUHD1E103 50
47 5 11 90 0.14 1000 0.5 2.5 5.0 2.5 EEUHD1V470( ) 200 2000
100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 EEUHD1V101( ) 200 2000
220 8 11.5 270 0.14 1000 0.6 3.5 5.0 EEUHD1V221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 EEUHD1V331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V471( ) 200 500
35
680 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V681( ) 200 500
2200 12.5 25 1260 0.16 2000 0.6 5.0 5.0 EEUHD1V222( ) 200 500
3300 16 25 1610 0.18 2000 0.8 7.5 7.5 EEUHD1V332( ) 100 250
4700 16 31.5 1910 0.20 2000 0.8 7.5 EEUHD1V472 100
6800 18 35.5 2050 0.24 2000 0.8 7.5 EEUHD1V682 50
When requesting taped product, please put the letter or between the( . Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
Please refer to the page of Taping Dimensions.
Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 May. 2014
EEE-105