Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type Series: ERJ UP3, UP6, UP8 Features High resistance to sulfurization achieved by adopting Anti-Sulfurated electrode material (Ag-Pd-based inner electrode) and structure ESD surge characteristics superior to standard metal film resistors High reliability Metal glaze thick film resistive element and three layers of electrodes Suitable for both reflow and flow soldering High power 0.25 W0603 inch / 1608 mm sizeERJUP3 0.50 W0805 inch / 2012 mm sizeERJUP6 0.66 W : 1206 inch / 3216 mm sizeERJUP8 Reference Standard IEC 60115-8JIS C 5201-8JEITA RC-2134C AEC-Q200 compliant RoHS compliant As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1T ERJS02 ERJS1T 1 2 3 4 5 6 7 8 9 10 11 12 E R J U P 6 D 1 0 0 2 V Product Code Resistance Tolerance Size, Power Rating Resistance Value Packaging Methods Code inch Power Rating Code Tolerance The first two or three digits are Code Packaging Part No. Thick Film significant figures of resistance and Chip Resistors UP3 0603 0.25 W D 0.5 ERJUP3 the third or 4th one denotes Punched Carrier Taping UP6 0805 0.50 W F 1 V ERJUP6 4 mm pitch, 5,000 pcs number of zeros following. UP8 1206 0.66 W J 5 ERJUP8 Three digit type (5 %), Four digit type (1 %, 0.5 %) Ex. 222: 2.2 k, 1002 : 10 k Ratings Power Limiting Maximum Category Resistance Resistance (3) Element Overload T.C.R. Part No. Temperature AEC-Q200 Rating Tolerance Range (1) (2) -6 (inch size) Range Grade at 70 C Voltage Voltage (10 /K) (%) (W) (V) (V) NEW 0.5, 1 10 to 1 M (E24, E96) 100 ERJUP3 0.25 150 200 55 to +155 Grade 0 0603 5 1 to 1.5 M (E24) 200 0.5, 1 100 10 to 1 M (E24, E96) ERJUP6 55 to +155 0.50 400 600 R<10 : 100 to +600 Grade 0 0805 5 1 to 3.3 M (E24) 10 R : 200 0.5, 1 10 to 1 M (E24, E96) 100 ERJUP8 0.66 500 1000 55 to +155 Grade 0 R<10 : 100 to +600 1206 5 1 to 10 M (E24) 10 R : 200 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=Power Rating Resistance Values, or Limiting Element Voltage listed above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) RCWV or Maximum Overload Voltage listed above, whichever less. (3) Use it on the condition that the case temperature is below the upper category temperature. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01Jan. 2020Anti-Sulfurated Thick Film Chip Resistors / Anti-Surge Type -55 70 100 Power Derating Curve ERJUP6,UP8 For resistors operated in ambient temperatures 80 above 70 C, power rating shall be derated in 125 60 50 % accordance with the figure on the right. 40 ERJUP3 20 155 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (C) Construction Protective coating Electrode (Inner) Ag-Pd-based Alumina substrate Electrode (Between) Thick lm resistive element Electrode (Outer) Dimensions in mm (not to scale) L a W T b Mass (Weight) Dimensions (mm) Part No. L W a b T (g/1000 pcs) ERJUP3 1.600.15 0.80+0.15/-0.05 0.15+0.15/-0.10 0.250.10 0.450.10 2 ERJUP6 2.000.20 1.250.10 0.250.20 0.400.20 0.600.10 4 ERJUP8 3.20+0.05/-0.20 1.6+0.05/-0.15 0.400.20 0.500.20 0.600.10 10 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01Jan. 2020 Rated Load (%)