Cabinet Top Covers & Cable Protection Part numbers: CTCN1X5 and CTCN3X5 Panduit Corp. 2012 INSTALLATION INSTRUCTIONS RW294 CTCN1X5 1 2 1 2 Insert one side of bezel, edgewise, into the top cap opening . Then pivot second side down, snapping bezel into place on ends. Visually inspect to ensure Remove top cover from bezel. tabs have engaged below opening. 3 4 1 2 Using the finger pull, apply moderate forces in any Insert one side of cover, lengthwise, into bezel. Then pivot direction to ensure the part is secured into the second side down, snapping cover into place inside bezel. cabinet top cap. For Technical Support: www.panduit.com/resources/install maintain.asp Page 1 of 2 Panduit Corp. 2012 INSTALLATION INSTRUCTIONS RW294 1 CTCN3X5 2 1 1 2 Insert one side of bezel, edgewise, into the top cap opening. Then pivot second side down, snapping bezel into place on ends. Visually inspect to ensure tabs have engaged below opening. Remove top cover from bezel 3 4 1 2 Using the finger pull, apply moderate forces in any direction to ensure the part is secured into the cabinet Insert one side of cover, lengthwise, into bezel. Then top cap. pivot second side down, snapping cover into place inside bezel. E-mail: For Instructions in Local Languages techsupport panduit.com and Technical Support: Phone: www.panduit.com/resources/install maintain.asp www.panduit.com 866-405-6654 Page 2 of 2