THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. F NOTES: E C C E 1. MATERIAL: BODY - ALUMINUM, TIN PLATED SCREW - ALUMINUM, TIN PLATED 2. UL LISTED & CSA CERTIFIED FOR USE UP TO 600V & TEMPERATURE RATED 90 C (AL9CU) NOTE: LAMA300-56-QY, LAMA600S-38-6Y, & F F LAMA1000-58-6Y ARE cULus. 3. DUAL RATED FOR USE WITH COPPER OR ALUMINUM D STRANDED CODE CONDUCTOR D 4. THESE PARTS ARE RoHS COMPLIANT B B 5. USE OF OXIDE INHIBITING JOINT COMPOUND LIKE PANDUIT CMP-100 RECOMMENDED FOR PAD TO PAD AND CONDUCTOR SURFACES A G RAD A 6. SEE PACKAGING LABEL FOR TIGHTENING TORQUE G RAD STUD SIZE INFORMATION STUD SIZE 7. PKG QTY: Q = 25 6 = 6 FIGURE 1 FIGURE 2 A DIMENSIONSIN mm PART WIRERANGE WIRESTRIP STUDSIZE FIG. HEXKEY* NUMBER COPPER/ALUMINUM LENGTHIN mm IN AB C D E F G LAMA30056QY 1 6AWG300kcmil 1.00 25.4 5/16 .45 11.4 2.00 50.8 1.00 25.4 .25 6.4 1.00 25.4 1.13 28.7 .55 14.0 5/16 I D LAMA35038QY 1 6AWG350kcmil 1.13 28.6 3/8 .50 12.7 2.25 57.3 1.13 28.6 .25 6.4 1.13 28.6 1.25 31.7 .62 15.8 5/16 C LAMA500386Y 1 4AWG500kcmil 1.22 31.0 3/8 .88 22.2 2.81 71.5 1.22 31.0 .31 7.9 1.50 38.0 1.56 39.7 .71 18.0 1/2 B LAMA600386Y 1 2AWG600kcmil 1.38 35.1 3/8 .63 15.9 3.18 80.9 1.38 35.1 .44 11.1 1.60 40.6 1.57 39.8 1.17 29.7 1/2 LAMA600S386Y 2 4AWG600kcmil 1.31 33.3 3/8 .63 16.0 2.81 71.4 1.31 33.3 .31 7.9 1.38 35.1 1.81 46.0 .88 22.4 3/8 H LAMA1000586Y 1 500kcmil1000kcmil 1.63 41.3 5/8 .81 20.6 3.50 88.9 1.63 41.3 .50 12.7 1.75 44.5 1.94 49.2 1.06 27.0 3/8 J G * HEX SIZE MAY DIFFER FROM CHART. DIFFERENCE IN SIZE WILL NOT AFFECT FIT, FORM, OR FUNCTION OF PART J. REMOVED LAMA800-58-6Y FROM DRAWING I. REVISED DIMENSIONS FOR LAMA300-56-QY 10N006AS-NC/00B E H. REVISED DIMENSIONS FOR LAMA600S-38-6Y 04 9/10 JHNU JHNU FLD FLD 10N006AS-NC G. REVISED DIMENSIONS FOR LAMA1000-58-6Y F. REVISED NOTES E. REVISED DWG NUMBER: 10N006AS-NC WAS C41567 CORP. TINLEY PARK, ILLINOIS D. REVISED LAMA350-38-QY DIM S: WIRE STRIP LENGTH WAS 1.12, G WAS .63, HEX KEY WAS 3/8 LAMA SERIES 300kcmil THRU 1000kcmil C. REVISED LAMA500-38-6Y DIM S: WIRE STRIP LENGTH WAS 1.25, A WAS .62, FLD FLD 10N006AS-NC 7/10 03 JHNU JHNU B WAS 2.75, C WAS 1.25 E WAS 1.38, ALUMINUM MECHANICAL LUGS F WAS 1.50, G WAS .88 CUSTOMER DRAWING B. REVISED LAMA600-38-6Y DIM S: WIRE STRIP LENGTH WAS 1.25, A WAS .62, D WAS .31, E WAS 1.38, F WAS 1.50, G WAS .88 UNLESS OTHERWISE SPECIFIED A. REMOVED TORQUE COLUMN FROM TABLE UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: ALL DIMENSIONS ARE GIVEN IN (.X) (.XXX) REMOVED MADE IN USA NOTE REMOVED RoHS NOTE --- --- INCHES, THIRD ANGLE PROJECTION 02 JHNU JHNU 7/07 CONVERTED DRAWING TO SOLIDWORKS (.XX) AN--- GLES --- DRAWN BY SCALE MAT L: REVISED RoHS NOTE 01 JHNU LEM PC00334 NONE 3/06 JHNU DATE DRAWING NO / CAD FILE DWG 00 LEM DRAWING RELEASED - RoHS COMPLIANT PC00299 SEE NOTES 2/06 JHNU 2/06 B CHK D 10N006AS-NC REV DATE BY CHK DESCRIPTION ECN -R SUP SIZE EX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Terminals category: Click to view products by Panduit manufacturer: Other Similar products are found below : HT-13-10 71M-250-32-NB 01-2065-1-0216 00581P0075 M10-10RX M10BCK 60205-1 604200-1 60598-1-CUT-TAPE 60617-1-C 60873- 1 M14-516R/SK M14-6RSX M18-10FLX M18-8FBX M18-8R/LX M18BCK 61314-6-C 61-S 61-SN-A 62-NBM-A 63-S 640179-1 640917-2-CUT-TAPE 6501550002 66107-2-C 696683-1 696834-1 696861-1 696931-1 696999-1 M8-516RK M86700006 MA250DMFMX-A 701-2007 701-2307 701-7761-03 70F-110-32-PB 718-N-A 71M-187-20-NBL 71M-250-32-NBL 72F-187-20-NBL 72M-250-32-NBL 7310 73F-250-32 73F-250-32-NBL 73F-250-32-NL F14-10C F-1M 751-250