PFR5504IG-UY

TX5500 F/UTP Copper Cable SPECIFICATION SHEET specifications Category 5e cable shall exceed ANSI/TIA-568-C.2 and IEC 61156-5 Category 5e component standards. The conductors shall be 24 AWG construction with FEP (CMP) or polyethylene (CMR) insulation. All four pairs shall be shielded with an overall polyester aluminum TX5500 Shielded Copper foil with stranded copper drain wire and covered with Cabling System a low smoke flame-retardant PVC jacket (CMP) or flame-retardant PVC (CMR) jacket. TX5500 F/UTP Copper Cable Plenum: PFP5504IG*-UY technical information Riser: PFR5504IG*-UY Electrical Certified channel performance in a 4-connector configuration up to Mini-Com TX5e Shielded performance: 100 meters and exceeds ISO 11801 2nd Edition Class D and Jack Module ANSI/TIA-568-C.2 Category 5e standards at swept frequencies up to 100 MHz Jack module: CJS5E88TGY Certified component performance up to 100 meters and exceeds the TX5e Shielded Patch Cords component requirement of IEC 61156-5 and ANSI/TIA-568-C.2 Meters: STPCH**MBBL Category 5e component standards at swept frequencies up to 100 MHz Mini-Com Angled All Metal Conductors/ Plenum: 24 AWG solid copper insulated with FEP Modular Patch Panels insulators: Riser: 24 AWG solid copper insulated with polyethylene 24-port, 1 RU: CPA24BLY Flame rating: Plenum: NFPA 262 Riser: UL 1666 48-port, 2 RU: CPA48BLY PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applications 72-port, 2 RU: CPA72BLY Installation tension: 25 lbf (110 N) maximum Mini-Com Flat All Metal Modular Patch Panels Temperature 32F to 122F (0C to 50C) during installation rating: -4F to 140F (-20C to 60C) during operation 24-port, 1 RU: CP24BLY Cable jacket: Plenum low smoke flame-retardant PVC 48-port, 2 RU: CP48BLY Riser flame-retardant PVC 72-port, 2 RU: CP72BLY Cable diameter: Plenum 0.229 in. (5.81mm) nominal Cable Prep Tools Riser 0.241 in. (6.12mm) nominal Wire snipping tool: CWST Cable weight: Plenum 30 lbs./1000 ft. (13.6 kg/305m) Riser 29 lbs./1000 ft. (13.1 kg/305m) Wire stripping tool: CJAST Packaging: 1000 ft. (305m) on a reel *For cable colors other than IG (International Plenum 37 lbs./1000 ft. (16.8 kg/305m) Gray), contact customer service. Riser 36 lbs./1000 ft. (16.3 kg/305m) **For standard lengths 1 to 10 meters Package tested to ISTA procedure 1A (increments of one meter) and 0.5, 1.5, 2.5, 15, 20 meters, change the length designation in the part number to the desired length. key features and benefits Standard patch cable color is Off White. For standard strain relief boot colors other than Overall metallic foil shield Provides the additional signal isolation advantage of an Black, replace suffix BL (Black) with F/UTP design and is ideal for network installations that BU (Blue), GR (Green), RD (Red), may be subjected to higher than normal external YL (Yellow) or OR (Orange) in the part electromagnetic noise sources number. For example, the part number for a 15-meter Off White patch cord with blue Improved security Reduces signal emissions for secure transmissions strain relief boots is STPCH15MBBU. Internal drain wire Facilitates means of grounding the cable and provides for efficient performance and protection of network investment Descending length Easy identification of remaining cable reduces installation cable markings time and cable scrap applications TX5500 F/UTP Copper Cable is a component workstation applications. of the Panduit TX5500 Shielded Copper Usage of the TX5500 Shielded Copper Cabling System. This end-to-end system Cabling System includes: provides design flexibility to protect network Ethernet 10BASE-T, 100BASE-T (Fast investments. With certified performance Ethernet), 1000BASE-T (Gigabit Ethernet) to the ISO 11801 Class D standards and 155 Mb/s ATM, 622 Mb/s ATM, ANSI/TIA-568-C.2 Category 5e, this system 1.2 Gb/s ATM is ideal for todays high performance Token Ring 4/16 www.panduit.com TX5500 F/UTP Copper Cable Additional Specifications Mechanical Test Ultimate Breaking Strength >90 lbf (400 N) 8 x cable diameter Minimum Bend Radius Electrical Test DC Resistance <9.38 Ohm per 328 ft. (100m) DC Resistance Unbalance <5% <5.6 nF per 328 ft. (100m) at 1 kHz Mutual Capacitance Capacitance Unbalance <330 pF per 328 ft. (100m) at 1 kHz Characteristic Impedance 100 Ohm +/-15% up to 100 MHz 72% nominal Nominal Velocity of Propagation (NVP) Cable Construction Conductor Conductor Insulator Wire Foil Shield Drain Wire Tape Rip Cord Jacket WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD. Markham, Ontario London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia cs-cdn panduit.com cs-emea panduit.com cs-ap panduit.com cs-japan panduit.com cs-la panduit.com cs-aus panduit.com Phone: 800.777.3300 Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information 2010 Panduit Corp. Visit us at www.panduit.com ALL RIGHTS RESERVED. Contact Customer Service by email: cs panduit.com WW-COSP140 or by phone: 800.777.3300 and reference COSP140 12/2010