WWW.PHIHONG.COM 26W LED Driver with 2 Channel Constant Current Outputs PDA026W LED Power Supply with 0-10V Dimming Features 2 Channel Output IP65 OVP, OCP, Over-Load and Short-Circuit AC input: 108-304VAC Protection & Brownout Protection 0.9 Power Factor Correction & THD <20% 5 Year Warranty Class 2 Output per UL1310 Applications Down Lights Architectural lighting Area Lights Troffers Safety Approvals cUL/UL8750 / UL60950 Class 2 Output per UL1310 Mechanical Characteristics Length: 242mm (9.53in) Height: 30.5mm (1.2in) Width: 43.5mm (1.71in) Weight: 650g Output Specifications Channel 1~2 DC Output Voltage Output Output Model Current Min. Typ. Max. Power PDA026W-D350G 27V - 36V 350mA 13W Phihong is not responsible for any error, and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 3/26/2015 WWW.PHIHONG.COM PDA026W-D350G Characteristics INPUT: EMC FCC Part 15B, Class A AC Input Voltage 108 to 304 VAC Immunity IEC61000-4-5 Nominal AC Input Voltage 120~277VAC Dielectric Withstand (Hi-pot) Test Primary to secondary: 3000VAC for 1 minute, <10mA AC Input Frequency 47~63 Hz Insulation Resistance Primary to secondary: >5M Ohm 500VDC, 1 Minute Maximum Input Current 0.35A FEATURES: Short-Circuit Protection Leakage Current Latching 0.75mA maximum Output Over-voltage Protection Power Factor Max Voltage Limit 0.9 Input / Output Connections THD < 20% Input Gauge Length Black (live) UL1316 AWG18 360mm OUTPUT: White (neutral) UL1316 AWG18 360mm Output Current Ripple Ground 60% Green/Yellow (GND) UL1316 AWG18 220mm Output Red (LED CH1~4+) UL1569 AWG22 200mm Efficiency Black (GND CH1~4-) UL1569 AWG22 200mm Typical Efficiency: 86% Dimming Violet (Dimmer +) UL1316 AWG18 200mm Environmental: Temperature Gray (Dimmer-) UL1316 AWG18 200mm Operation case -20 to Tc +65C Yellow (20V) UL1316 AWG18 200mm Non-operation -40 to +85C Operating Humidity 5% to 95% Warranty 5 Years PDA026W-D350G Dimension Diagram Unit:mm