PPL24A-120 Phihong

WWW.PHIHONG.COM 24W, 12V Wall Mount Adapter Features DOE Level VI Efficiency Compliant Non-vented/Spill-proof Case Class B EMI Applications Networking Consumer Electronics Peripherals Safety Compliance UL62368-1 Mechanical Characteristics Length: 72mm (2.83in) Height: 69mm (2.72in) Width: 34mm (1.34in) Weight: 170g (6oz) Output Specifications 1 Output Max Output Ripple & Noise Model Regulation Voltage Current Power p-p(max) PPL24A-120 12V 2A 24W 5 % 120mV Notes: 1. 20MHz bandwidth frequency oscilloscope, add a 0.1F multilayer Cap. and Low ESR Electrolytic Cap. (10F) at output connector terminals (nominal line voltage, full load) Phihong is not responsible for any error and reserves the right to make changes without notice. Please visit our website at www.phihong.com for the most up-to-date specifications and contact information. Revised 5/14/2020 1 PPL24A-120 Characteristics WWW.PHIHONG.COM Input: ENVIRONMENTAL AC Input Voltage Temperature 100 to 240VAC Operating 0C to + 40C Non-operating -20C to +80C AC Input Frequency Operating Humidity 20C to 80% 50 to 60Hz Emissions Input Current Complies with FCC Class B 0.58A max. Dielectric Withstand (Hi-Pot) Test Leakage Current Primary to Secondary: 3000VAC for 1 min, <0.25mA 10mA Inrush Current Insulation Resistance 50A max/100VAC 60A max, 230VAC Primary to Secondary:10M ohm for 500 VDC (Cold Start at 25C, full load) DC Cable Length Input Power Saving 1500MM 0.1W at 115VAC & 230VAC, no load DC Cable Type OUTPUT: 22AWG 2 Efficiency DOE Level VI DC Output Connector 2.1mm x 5.5mm x 10mm Over-Voltage Protection 22V max DC Plug pin assignment Short-Circuit Protection Auto-recover after short-circuit fault being removed Over-Current Protection 5A max Notes: 1. The characteristics defined are at ambient temperature of 25C unless otherwise specified 2. Efficiency is measured after 30 minutes burn-in