Microswitches M series 2 2 Technical data Housing Made of glass-reinforced polymer, self-extinguishing, shock-proof thermoplastic resin. Protection degree: IP40 (with protection art. VF C02) IP20 (with protection art. VF C01, VF C03) General data Ambient temperature: from -25C to +85C 1 Max operating frequency: 3600 operations cycles /hour 1 Mechanical endurance: 10 million operations cycles (1) One operation cycle means two movements, one to close and one to open contacts, as foreseen by IEC 947-5- 1 standard. Electrical data Dielectric strength: 2000 VAC/min between terminals and other metallic parts towards Main data Polymer housing Protection degree IP20 o IP40 Cross section of the conductors (flexible copper wire) 4 terminal types available 2 MV, MM series: min. 1 x 0,34 mm (1 x AWG 22) 32 actuators available 2 max. 1 x 2,5 mm (1 x AWG 14) In conformity with standards: IEC 947-5-1, IEC 337-1, EN 60947-5-1, CEI EN 60947-5-1, CEI 17-45, CEI 23-11, IEC 529, EN 60529, CEI 70-1, CENELEC EN 50013 Approvals: IEC 947-5-1 Markings and quality marks: In conformity with requirements requested by: Approval IMQ: EL285 Low Voltage Directive 73/23/EEC and subsequent modifications and completions. Machinery Directive 98/37/EEC. Electromagnetic Compatibility 89/336/EEC and subsequent modifications and completions. Electrical data Utilization categories Alternate current: AC15 (5060 Hz) Ue (V) 250 Thermal current (Ith): 16 A Ie (A) 6 Rated insulation voltage (Ui): 250 VAC 300 VDC Direct current: DC13 Protection against short circuits: fuse 10 A 500 V type gG Ue (V) 24 125 250 Pollution degree: 3 Ie (A) 6 1,1 0,4 page 2/125 General Catalog 18 General Catalog 18 page 2/126 2005 Copyright Pizzato Elettrica 2005 Copyright Pizzato ElettricaMicroswitches M series 2 2 Technical data Data type approved by IMQ Rated insulation voltage (Ui): 250 VAC Thermal current (Ith): 16 A Protection against short circuits: fuse 16 A 250 V type gG MV, MF, MS terminals Pollution degree 3 Utilization category: AC15 Operation voltage (Ue): 250 VAC (50 Hz) Operation current (Ie): 5 A Forms of the contact element: C In conformity with standards: EN60947-1, EN 60947-5-1 and subsequent modifications and completions, fundamental requirements of the Low Voltage Directive 73/23 EEC and subsequent modifications and completions. Please contact our technical service for the list of type approved products. Code structure Attention The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office.. MS 40-1 Terminals type Suffix MS solder terminals no suffix (standard) MV screw terminals 9,5x4 mm metal roller (for actuator 40, 42, 1 45, 47, 53, 54, 55, 57, 58, 59 only) MF faston terminals 9,5x7,8 mm polymer roller (for actuator 40, 2 MM mantle terminals 42, 53, 54, 55 only) Actuator 01 with pin 02 with pin 03 with small push button .. ................ Accessories Article Description Pack Article Description Pack VF C01 Protections (terminals covers) 10 pcs VF C02 Protections (terminals covers) 10 pcs Protection made of self-extinguishing shock-proof material for MS Protection with cable gland PG 9, (multipolar cables min 5 mm, series microswitches. max 7 mm) made of shock-proof glass-reinforced material for MS, MV, MM microswitches. Article Description Pack VF C03 Protections (terminals covers) 10 pcs Items with code on the green background are available in stock Protection with snap in assembly, made of self-extinguishing shock-proof material. For MS, MV, MM microswitches. It allows the installation of many switches side by side. page 2/125 General Catalog 18 General Catalog 18 page 2/126 2005 Copyright Pizzato Elettrica 2005 Copyright Pizzato Elettrica