Rev. A (10/17) Page 1 of 3 Sponges Plato sponges are manufactured with pure cellulose (a wood derivative) which has the ability to absorb many times its weight in water. Also resistant to abrasion and tearing forces that occur during the tip wiping process. Cellular structure is designed to expand when wet, and retain water for long periods of time. Meets ANSI (J-STD-001B) for low sulphur content and fine porosity. Extend tip life Remove surface oxides Remove excess solder Product Dimensions CS-1 Sponge CS-14M Sponge w/multiple holes Comparable to Weller SP-60, Pace 4021-005 Comparable to Weller T52241999 1.5 x 2.12 x 1 thick (38mm x 54mm x 25mm) 2.2 x 2.75 1 thick (55mm x 70mm x 25mm) 10 sponges/pack 10 sponges/pack CS-17 Sponge CS-17/625 Thinner Economy Sponge Cut-to-fit sheet Cut-to-fit sheet 8.5 x 17 x 1 thick (216mm x 432mm x 25mm) 8.5 x 17 x 0.625 thick (216mm x 432mm x 16mm) 1 sheet 1 sheet 800-858-4043 www.platoproducts.com Rev. A (10/17) Page 2 of 3 Sponges Product Dimensions CS-36 Sponge CS-44 Sponge Comparable to Hexacon 8141, 8141C Comparable to Weller TC205 2.25 x 3.5 x 1 thick (57mm x 89mm x 25mm) 2.7 x 2.7 x 1 thick (69mm x 69mm x 25mm) 10 sponges/pack 10 sponges/pack CS-47 Sponge CS-44/625 Sponge Fits Hakko Comparable to Metcal STSS-YS3, AC-YS3, ACY10, 2.7 x 2.7 x 0.625 thick (69mm x 69mm x 16mm) Ungar 455, UTC234 10 sponges/pack 2.1 x 3.2 x 1 thick (53mm x 81mm x 25mm) 10 sponges/pack CS-9/625 Sponge CS-888H Sponge w/hole Comparable to Hexacon 8101, 8101C, 8121, 8121C Fits Hakko FX-888, FX-888D 3.5 x 4.5 x 0.625 thick (89mm x 114mm x 16mm) Comparable to Hakko A1159 10 sponges/pack 2 3/8 dia x 2L x 5/8 thick (60mm x 51mm x 17mm) 10 sponges/bag 800-858-4043 www.platoproducts.com