PVC Heat-Shrink Tubing Features: 2:1 shrink ratio Low shrink temperature Highly flame retardant Engineered for total compatibility with PVC jacketed wire and cable Resists many chemicals and oils, chlorine, moisture, salt water and fungus Proprietary stabilizers provide outstanding resistance to UV light Colour : Black Highly engineered formulation provides superior strength - 30% stronger than polyolefin Use: Applications requiring smooth, tight-fitting, aesthetic coverings, especially for products with irregular shapes Protecting products - outdoors and indoors - from UV light, fading, harsh chemicals, chlorinated cleansers, moisture, salt water, fungus, dirt, abrasion and splintering The preferred choice for use with PVC wire and cable Insulation and strain relief of wire harnesses, terminals and wire splices Applications requiring outstanding dielectric and mechanical protection without damage to enclosed, underlying or adjacent components Specifications: Technical Data: Shrink Ratio : 2:1 Min. Recommended Shrink Temperature : 100C (212F) Operating Temperature Range : -20C to 105C Longitudinal Shrinkage : Approximately 15% Physical / Electrical Properties: Specific Gravity : 1.32 Tensile Strength : 3,000 psi Ultimate Elongation : 300% Flammability : UL Subject 224 VW-1 Brittleness Temperature : -28C Volume Resistivity : 21.5 1012 Dielectric Strength : 1,083 vpm Storage : Heat sensitive. Store at 70F or below. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <1> 11/02/15 V1.1PVC Heat-Shrink Tubing Expanded I.D. Recovered I.D. Recovered Wall Minimum Maximum Nominal Size in. mm in. mm in. mm 1/2 .500 12.70 .250 6.35 .028 0.71 Part Number Table Description Part Number PVC Heat-Shrink Tubing , Black, Pack of 1,000 2800 1/2 2 (0.5mm 50.8mm) long pieces Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. pro - POWER is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com www.cpc.co.uk Page <2> 11/02/15 V1.1