XRT-603

REVISIONS PART NO. ECN REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE XRT-60 Series -A RELEASED ASH 8/12/11 JAG 8/12/11 22/12/11 Dimensions : Millimetres DRAWING TITLE: Important Notice: This data sheet and its contents (theInformatio) belong to the Premier TOLERANCES: DRAWN BY: DATE: Farnell Group (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any ASH 8/12/11 CAT5E Crossover Cable intellectual property rights is granted. The Information is subject to change without notice and UNLESS OTHERWISE replaces all data sheets previously supplied. The Information supplied is believed to be accurate CHECKED BY: DATE: but the Group assumes no responsibility for its accuracy or completeness, any error in or omis- SPECIFIED, SIZE ELECTRONIC FILE REV DWG NO. sion from it or for any use made of it. Users of this data sheet should check for themselves the DIMENSIONS ARE 8/12/11 Information and the suitability of the products for their purpose and not make any assumptions JAG A 3942661-DWG based on information included or omitted. Liability for loss or damage resulting from any reliance A FOR REFERENCE on the Information or use of it (including liability resulting from negligence or where the Group was APPROVED BY: DATE: aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit PURPOSES ONLY. or restrict the Group s liability for death or personal injury resulting from its negligence. SCALE: NTS U.O.M.: mm SHEET: 1 OF 2 22/12/11 Pro-SIGNAL is the registered trademark of the Group. Premier Farnell plc 2004.REVISIONS PART NO. ECN REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE XRT-60 Series -A RELEASED ASH 8/12/11 JAG 8/12/11 22/12/11 Specifications: Wire: CAT5E UTP STR Conductor Bare copper : 24 AWG 7 / 0.196 0.015 mm Insulation Thickness : Minimum at any point : 0.15 mm Maximum average : 0.25 mm Diameter : 0.98 0.06 mm PVC Jacketing Thickness : Minimum at any point : 0.42 mm Maximum average : 0.49 mm Diameter : 5.4 0.2 mm Part Number Table Description Part Number Path Lead, CAT5E, X-Over, 0.5 M XRT-600 Path Lead, CAT5E, X-Over, 1 M XRT-601 Path Lead, CAT5E, X-Over, 2 M XRT-602 Path Lead, CAT5E, X-Over, 3 M XRT-603 Path Lead, CAT5E, X--Over, 5 M XRT-605 www.element14.com www.farnell.com www.newark.com www.cpc.co.uk DRAWING TITLE: Important Notice: This data sheet and its contents (theInformatio) belong to the Premier TOLERANCES: DRAWN BY: DATE: Farnell Group (theGrou) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any ASH 8/12/11 CAT5E Crossover Cable intellectual property rights is granted. The Information is subject to change without notice and UNLESS OTHERWISE replaces all data sheets previously supplied. The Information supplied is believed to be accurate CHECKED BY: DATE: but the Group assumes no responsibility for its accuracy or completeness, any error in or omis- SPECIFIED, SIZE ELECTRONIC FILE REV DWG NO. sion from it or for any use made of it. Users of this data sheet should check for themselves the DIMENSIONS ARE 8/12/11 Information and the suitability of the products for their purpose and not make any assumptions JAG A 3942661-DWG based on information included or omitted. Liability for loss or damage resulting from any reliance A FOR REFERENCE on the Information or use of it (including liability resulting from negligence or where the Group was APPROVED BY: DATE: aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit PURPOSES ONLY. or restrict the Group s liability for death or personal injury resulting from its negligence. SCALE: NTS U.O.M.: mm SHEET: 2 OF 2 22/12/11 Pro-SIGNAL is the registered trademark of the Group. Premier Farnell plc 2004.