SMP6LC12-2P-LF ProTek Devices

SMP6LC05-2P - SMP6LC24-2P Only One Name Means ProTekTion MULTI-LINE LOW CAPACITANCE TVS ARRAY DESCRIPTION The SMP6LCxx-2P Series are high powered multi-line low capacitance transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging eects of Eff SD, tertiary lightning and switching transients. This series has a peak pulse power rating of 400 Watts for an 10/1000s waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. SO-16 PACKAGE APPLICATIONS FEATURES Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV T1/E1 Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns Customer Premise Equipment (CPE) Telecommunication Equipment Compatible with IEC 61000-4-5 (Surge): 100A (Applies to 5V) Wireless Communication Equipment 100A (2/10s) per Bellcore GR-1089 (Intra Building) 400 Watts Peak Pulse Power per Line (tp = 10/1000s) 3,900 Watts Peak Pulse Power per Line (tp = 8/20s) ITKU.20 I 40A (5/310s) (Applies to 5V and 6.5V) PP Bidirectional Configuration High Surge Capability Available in Multiple Voltages Protects 2 Bidirectional Lines Low Capacitance < 30pF per Line Pair RoHS Compliant REACH Compliant MECHANICAL CHARACTERISTICS Molded JEDEC SO-16 Package Approximate Weight: 0.15 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C 16mm Tape and Reel Per EIA Standard 481 Flammability Rating UL 94V-0 PIN CONFIGURATION 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 ISO 9001: 2015 CERTIFIED 05088.R15 10/18 Page 1 05088SMP6LC05-2P - SMP6LC24-2P Only One Name Means ProTekTion TYPICAL DEVICE CHARACTERISTICS MAXIMUM RATINGS 25C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS Operating Temperature T -55 to 150 C L Storage Temperature T -55 to 150 C STG Peak Pulse Power (tp = 8/20s) - See Figure 2 P 3,900 Watts PP Peak Pulse Power (tp = 10/1000s) - See Figure 2 P 400 Watts PP ELECTRICAL CHARACTERISTICS PER LINE 25C Unless Otherwise Specified PART RATED MINIMUM MAXIMUM MAXIMUM TYPICAL NUMBER STAND-OFF BREAKDOWN CLAMPING LEAKAGE CAPACITANCE (Note 1) VOLTAGE VOLTAGE VOLTAGE CURRENT (Fig. 3) 1mA V 0V, 1MHz WM V V 8/20S I C WM (BR) D VOLTS VOLTS V I A pF C PP SMP6LC05-2P 5.0 6.0 26.0V 150.0A 300 15 SMP6LC6.5-2P 6.5 7.2 28.0V 150.0A 300 15 SMP6LC08-2P 8.0 8.6 30.0V 145.0A 25 15 SMP6LC12-2P 12.0 13.3 35.0V 140.0A 2 15 SMP6LC15-2P 15.0 16.7 50.0V 110.0A 2 15 SMP6LC24-2P 24.0 26.7 57.0V 80.0A 2 15 NOTES 1. Do not surge from pins 15/16 to 1/2, 3/4 to 13/14, 11/12 to 5/6 and 7/8 to 9/10. PIV typically greater than 100 Volts for each rectifier diode. FIGURE 1 MAXIMUM IPP VS PULSE DURATION BY VOLTAGE 1000 5V 6.5V 8V 12V 15V 100 24V 10 1 10 100 1000 t - Pulse Duration - s d ISO 9001: 2015 CERTIFIED 05088.R15 10/18 Page 2 05088 I - Amps PP