HIGH FREQUENCY PLANAR TRANSFORMERS PA08XXNL Series (up to 140W) Power Rating: up to 140W Height: 8.6mm to 9.7mm Max Footprint: 23.4mm x 21.6mm Max Frequency Range: 200kHz to 700kHz Isolation (Primary to Secondary & Core): 1750VDC Electrical Specifications 25C Operating Temperature -40C to +125C 3 1 2 Primary Leakage DCR (m MAX) Maximum Part Turns Schematic Inductance Inductance Height Number Primary Primary Secondary Primary A Primary B Secondary (H MIN) (H MAX) (mm) AB PA0801NL 4T 4T 153 0.45 17.5 17.5 7 8.6 PA0802 4T 5T 194 0.45 17.5 20 7 8.6 4T PA0803NL 5T 5T A1 240 0.55 20 20 7 8.6 (1T:1T:1T:1T) PA0804NL 5T 6T 290 0.60 20 25 7 8.6 PA0805NL 6T 6T 345 0.65 25 25 7 8.6 PA0806NL 4T 4T 153 0.45 17.5 17.5 .875 & .875 8.6 PA0807 4T 5T 194 0.45 17.5 20 .875 & .875 8.6 PA0808NL 5T 5T 1T & 1T A2 240 0.55 20 20 .875 & .875 8.6 PA0809NL 5T 6T 290 0.60 20 25 .875 & .875 8.6 PA0810NL 6T 6T 345 0.65 25 25 .875 & .875 8.6 PA0811NL 4T 4T 153 0.45 17.5 17.5 1.75 & 1.75 8.6 PA0812 4T 5T 194 0.45 17.5 20 1.75 & 1.75 8.6 PA0813NL 5T 5T 2T & 1T A3 240 0.45 20 20 1.75 & 1.75 8.6 PA0814NL 5T 6T 290 0.50 20 25 1.75 & 1.75 9.7 PA0815NL 6T 6T 345 0.55 25 25 1.75 & 1.75 9.7 Notes: 1. Inductance is measured with both primary windings connected in series (2 to 5, with 3 and 4 shorted). 2. Leakage inductance is measured on winding (2-5) with (3,4) and (7, 8, 9, 10, 11) shorted. 3. TheN suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have theN suffix, but an RoHS compliant version is required, please contact Pulse for availability. 4. Basic insulated parts can be made available. Please contact Pulse for availability. Mechanical Inches Dimensions: 1 & A: )) 1 5 Weight ..................11.0 grams mm Tape & Reel...............180/reel Unless otherwise specified, 1 ACC: + 1 Tray.............................40/tray .010 all tolerances are 0,25 * 7 C / D / . , 5 ((( * , , 5 , 8 9: < 0 (>(: 1 3&*4 4* 0. , 0 ** , 1 & A: , + % *7 5F5 = 1 ACC: 2 789 780J NOTE: The above is a universal footprint for a component that has all 11 pins populated. For a given part number, it is only necessary to provide pads for the terminations shown in the schematics on the next page. USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 89 SPM2007 (11/07)HIGH FREQUENCY PLANAR TRANSFORMERS PA08XXNL Series (up to 140W) Schematics 8 8 8 8 8 8 8 8 8 8 8 8 . 1 1 1 1 . 0 . 0 . 0 1 1 1 1 . 1 Notes 1. The above transformers have been tested and approved by 2. To determine if the transformer is suitable for your application, Pulse s IC partners and are cited in the appropriate datasheet it is necessary to ensure that the temperature rise of the or evaluation board documentation at these companies. To component (ambient plus temperature rise) does not exceed determine which IC and IC companies are matched with the its operating temperature. To determine the approximate above transformers, please refer to the IC cross reference on temperature rise of the transformer, refer to the graphs below. the Pulse web page. See the Spyglass transfomer matrix on the next page for other winding configurations that can be made available. 1 : - 8 9 : - % & - ) - ) - ) - ) - ) - ) - ) %) & % & + ,E5 , + 4F K K 9 E57 A GE- ) + < E:F ,2 USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998 Shanghai 86 21 54643211 / 2 China 86 755 33966678 Taiwan 886 3 4641811 www.pulseeng.com 90 SPM2007 (11/07) 1 % & .0 022 % + + A GE- %6 &